I removed the unneeded 911 brackets and welded the 914 adapter on to the outer tube. The bearings and the actual steering shaft are not included. You will need to provide them
All of the cutting grinding & welding is complete also I have painted since this photo was taken
100 shipped in CUSA
All you forgot was the price.
The price is $100 including shipping.
The 914 steering shaft and lower bearing can be used and I will include with this 914-6 clone column. The lock function will not work and the upper bearing will not be included but McMark has a very nice option.
You want that upper bearing back to go with this? Still sitting where we left it.
Also, this won't fit 70-71 cars.
Thanks Mark, your right of course the older 914 had a different bracket. Your aftermarket top bearing is far superior.
David
I'll take it. Looks like the clam shells may fit this one. It will also allow me to check some measurements.
-Mark
I'll take it if Mark changes his mind.
Jeff B
Larmo63 sent me a PM on 2/20 claiming to want it. If he passes then Mark is 2nd then jkb944T is 3rd.
Thanks
David
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)