Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTD: Spanner Wrench

Posted by: jim_hoyland Feb 20 2017, 05:19 PM

Looking for the spanner wrench that as allows for adjustment on the Bilstein coil overs.

Or, the sizing so I could buy one on eba

***My neighbor had 3 ! Have me one and made the adjustment to the rear coil over height. smile.gif

Posted by: jmill Feb 20 2017, 05:27 PM

They sell adjustable ones. I know harbor freight and autozone sell both types for most coil over sizes.




Attached image(s)
Attached Image

Posted by: jim_hoyland Feb 20 2017, 05:50 PM

QUOTE(jmill @ Feb 20 2017, 03:27 PM) *

They sell adjustable ones. I know harbor freight and autozone sell both types for most coil over sizes.


Thanks, I'll stop by HF tomorrow... smile.gif Do I need to know the size, or is it obvious from looking ?

Posted by: jmill Feb 20 2017, 07:22 PM

Bad news. I don't see them on Habor Freights website anymore. They used to have them in a multi color set. They are sized by the diameter. Measure the adjuster diameter and you'll know the size you need.

Posted by: jim_hoyland Feb 21 2017, 06:33 PM

None at HF nor O'Reilly

Posted by: mepstein Feb 21 2017, 07:13 PM

I can't guarantee it's the right size but bicycle shops should have them for sale. The bottom bracket on a bike used to use a spanner wrench.

Posted by: 914forme Feb 21 2017, 09:26 PM

http://www.paragon-products.com/Coil-Over-Kit-Spanner-p/arhk_spanner.htm

Posted by: jim_hoyland Feb 22 2017, 01:31 PM

QUOTE(914forme @ Feb 21 2017, 07:26 PM) *

http://www.paragon-products.com/Coil-Over-Kit-Spanner-p/arhk_spanner.htm


Thanks. I will place an order if no one has one to sell

Posted by: bdstone914 Feb 22 2017, 09:27 PM

QUOTE(jim_hoyland @ Feb 22 2017, 01:31 PM) *

QUOTE(914forme @ Feb 21 2017, 07:26 PM) *

http://www.paragon-products.com/Coil-Over-Kit-Spanner-p/arhk_spanner.htm


Thanks. I will place an order if no one has one to sell


I have some of them you could borrow. Not sure what size you need. one is hinged and others fixed.
Bruce

Posted by: BillC Feb 23 2017, 06:57 AM

You can get genuine Bilstein spanners from Summit Racing. I think you'll need one small and one large:

Small: https://www.summitracing.com/parts/bsn-191015/overview/

Large: https://www.summitracing.com/parts/bsn-191014/overview/

And, if those aren't the right sizes, do a search for "spanner wrenches", and they have lots of options.

Posted by: bdstone914 Feb 23 2017, 07:34 AM

You can call Bilstein down in Poway to find the size(s) needed. (858) 386-5900

Posted by: jim_hoyland Feb 23 2017, 05:48 PM

QUOTE(bdstone914 @ Feb 23 2017, 05:34 AM) *

You can call Bilstein down in Poway to find the size(s) needed. (858) 386-5900


Thanks Bruce; I'll call them
I seen Summit sells a 70mm and a 90mm spanner.......?

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)