Posted by: Jett Feb 20 2017, 10:03 PM
We are in final assembly and need help hunting the last few bits.
While installing the interior we realized that the under dash captive nuts are missing, so we cannot install the knee pad. To mitigate the missing parts we tried to steal a set from our "parts" car, but could only find one of the five required.
That said, does anyone have these rare parts or know where they can be purchased? Ideally we would like 10, but would be happy with more than one
Thanks!
Attached image(s)
Posted by: Larmo63 Feb 20 2017, 10:32 PM
Bruce Stone should have these.
Aren't they the same ones that are on the inner doors, maybe the same front license plate holders on the front bumper?
They are available.
Posted by: bdstone914 Feb 20 2017, 10:48 PM
QUOTE(Larmo63 @ Feb 20 2017, 10:32 PM)
Bruce Stone should have these.
Aren't they the same ones that are on the inner doors, maybe the same front license plate holders on the front bumper?
They are available.
I only found one. might have more in dashes of parts cars. Door ones are 5mm.
You can get new ones from Belmetric.
https://www.belmetric.com/metric-cage-nuts-c-3_1192/ncage6ss-cage-nut-stainless-cage-with-zinc-nut-p-6921.html?zenid=t2fr0v0eraoa6r11t22j6220q2
Posted by: Jett Feb 20 2017, 11:01 PM
QUOTE(bdstone914 @ Feb 20 2017, 08:48 PM)
QUOTE(Larmo63 @ Feb 20 2017, 10:32 PM)
Bruce Stone should have these.
Aren't they the same ones that are on the inner doors, maybe the same front license plate holders on the front bumper?
They are available.
I only found one. might have more in dashes of parts cars. Door ones are 5mm.
You can get new ones from Belmetric.
https://www.belmetric.com/metric-cage-nuts-c-3_1192/ncage6ss-cage-nut-stainless-cage-with-zinc-nut-p-6921.html?zenid=t2fr0v0eraoa6r11t22j6220q2
Thanks, but I think the new ones are a bit different and don't have the adjustment required.
I would really appreciate some stock ones.
Thanks!
Posted by: Mikey914 Feb 20 2017, 11:46 PM
He is correct the old ones have slightly more "slop" or adjustment in them
Posted by: euro911 Feb 21 2017, 01:47 AM
Check with Garold Shaffer ... he might have a stash of them
Posted by: 914_teener Feb 21 2017, 11:35 AM
Yep...the new ones are for EIA electronic racks and the rack mounts are for sheet metal .125 in thckness. Check with Fastenal .....I have the same need but for the driver door map pocket mointing points.
Posted by: boxstr Feb 21 2017, 03:17 PM
I have a box full of Genuine Porsche 914 cage nuts, for under the dash, at CAMP 914. I will be there this afternoon.
Pm me your mailing address
Craig at CAMP
Attached thumbnail(s)
Posted by: 914_teener Feb 21 2017, 06:24 PM
QUOTE(boxstr @ Feb 21 2017, 01:17 PM)
I have a box full of Genuine Porsche 914 cage nuts, for under the dash, at CAMP 914. I will be there this afternoon.
Pm me your mailing address
Craig at CAMP
Thanks Craig. I think Gerald is sending me some.
Thanks though.....I.m sure that someone who is doing their kneepad or dash will need some.
Posted by: boxstr Feb 21 2017, 06:34 PM
Seems to me someone else started this thread, they wanted knee pad nuts.
Craig at CAMP
Posted by: Jett Feb 21 2017, 10:02 PM
Thanks everyone for the help!