021-198-009B 1.7 / 1.8L full gasket set New $57.25 / sell $40 sold two-strokejohn039 198 175BR 2L ring set New $30 / sell $21 sold echocanyons021 198 481A standard main bearings New $99 / sell $69 sold echocanyons156pc type 4 store hardware kit #00080 new $49 / sell $34 sold JettRocker spacer set type 4 store new $20 / sell $14 sold rfinegan[s]push rod tubes new $51 / sell $35sold two-strokejohn
[/s]European Motor works 054-106H cam new $150 / sell $105European Motor Works lifters new $80 / sell $56 sold echocanyonsEuropean motor Works HD springs new $25 / sell $18 sold echocanyons
European Motor Works cam gear new $40 / sell $28European Motor Works uncut push rods w/adjustable push rod new $84 / sell $58 sold MartyAA piston and cylinder set 96mm for 1.7/1.8 increase to 1910cc new $330 / sell $198 sold echocanyonsweber IDF update kit 40mm new $135 / sell $95 sold gintClaudes Buggies Maxi pump 1 new $47 / sell $33 sold KevinWCam bearing set H70073 new $21 / sell $15sold two stroke johncarter fuel pump 504 new $39 / sell $27 - sold to 914forme
More to follow
Attached thumbnail(s)
Fuel Pump. low pressure unit? If so I'll take it.
What size is the oil pump?
Thanks, Kevin
26mm gears.
From their website -
Maxi Pump 1 - The Maxi Pump 1 is the perfect oil pump for street, off-road and competition. The die cast blue-printed housing features a "pressure chamber" to help provide a constant flow of oil. The added volume and anti-cavitation features of the Maxi 1 make it the top choice for use with external oil cooler and filter systems. The Maxi 1 slips right in to replace your stock oil pump.
Fuel pump is low pressure for carbs.
I'll take it. I can pickup as I used to spend bunch of time in your town.
I'll take the hardware kit, if available.
Please PM shipping to 98073
Cheers
I'll take the gasket set, pushrod tubes, cam bearing set.... please send total and payment info
area code 43146 in Orient, oh
I would like the p&cs and cam please
The cam looks like it's for carbs so I'll pass on this.
I will rake the rings and bearings though
I'll take the lifters, springs and pushrod tubes as well
I will take the rocker spacer kit (PM sent)
Robert
I'll take this:
weber IDF update kit 40mm new $135 / sell $95
Shipping to 80602. Please also let me know your payment preference. PP works for me.
Just what is in the article i posted. i have no direct experience.
Ill send everyone a PM tonight when i get home with shipping info. Lunch just few by today:(
I'd be interested in the pushrod set and length adjustment tool. Shipping to 94583.
Thanks, Marty
PM sent.
Attached image(s)
i think i have send a PM to everyone with shipping info.
The Cam and the cam gear are still available. The cam was selected by European Motor Works based on a 1911cc build with carbs.
If someone is interested in the cam and the cam gear as a sell ill sell the pair for $125 including shipping within the US.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)