Printable Version of Topic

Posted by: euro911 Mar 27 2017, 12:03 PM

Purchased what appears to be a NOS one at Mike Shantz's auction on 10/21/17


I have a good driver's side stainless HE, so now I'm looking for a good passenger side HE to finish up the exhaust system.

Lemme know whatcha gots ...

Posted by: ndfrigi Mar 27 2017, 01:28 PM

yup here is Mark's driver side HE. bump for anyone have the passenger side.

Posted by: euro911 Apr 5 2017, 05:44 PM

Anybody? ... Bueller?

Posted by: euro911 Apr 15 2017, 08:03 PM

BUMP ... still need one. Anybody?

Posted by: euro911 Jun 1 2017, 01:00 PM

Still looking for one ...

Posted by: euro911 Jun 7 2017, 11:21 AM

One week later ...

Posted by: euro911 Jul 1 2017, 09:02 PM

BUMP ... still looking

Posted by: North Coast Jim Jul 3 2017, 07:17 AM

I see that it's not looking so good for us with the desire for a passenger side SS Exhaust. Was going to post this morning my need for one and found yours. Let's see if there are 2 of them out there. I can't seem to get the exhaust leak stopped no matter how hard I try. New engine rebuilt with Hoffman Eng heads. New studs too. Persistent exhaust leak. This problem was fixed on the drivers side as I was able to score a never mounted SS Exhaust. Works great. Now I need the Passenger side. Don't want the offshore junk.

Posted by: euro911 Jul 23 2017, 12:53 AM

Posted by: North Coast Jim Jul 23 2017, 08:55 AM

Got tired of waiting for a response myself. Bought the new one from AA made by Dansk in the Far East. It's been on the car a week now and all is well.
The exhaust is lighter than the original and in checking out why they indeed are using a thinner gauge metal. Forgot the measurement difference between old and new SS exhaust pipes.

Works as advertised and better than the old one. It cracked below the mounting ear. Didn't want the hassle of getting it welded and than trying to get the face to seal up to the exhaust port. You know it's going to move with the heat of the weld operation. I don't have the patience nor the time to work that issue. Anyway by 68 old year old body doesn't take kindly to the work.

My 2 cents .......................

Posted by: euro911 Jul 23 2017, 12:02 PM

I have some time to kill before I actually need it, Jim, but thanks for the info. If need be, I'll just install the 1.7L SSIs we have here and change out later.

Posted by: euro911 Aug 19 2017, 12:56 PM

Mid-August BUMP

Posted by: euro911 Oct 18 2017, 12:05 AM

Mid-October BUMP

Posted by: second wind Oct 18 2017, 09:49 AM

I have one hanging in my garage.....let me see what it is exactly.....will pm you in an hour or so....
gg

Posted by: euro911 Oct 18 2017, 01:53 PM

Hey, thanks

Posted by: bdstone914 Oct 18 2017, 07:24 PM

Mike Shantz has one in his collection of parts to be auctioned Saturday. I saw it, have a picture and it is clean.

Posted by: euro911 Oct 18 2017, 09:22 PM

Sent him a PM months ago, he never responded

Posted by: second wind Oct 19 2017, 12:54 PM

email sent......pipe is in good condition and can be cleaned up nice. Engine side dents hard to see if at all when mounted......bottom side not bad at all. No cracks anywhere.
Please let me know.....thank you.
gg

Posted by: euro911 Oct 19 2017, 03:11 PM

Hey Gregg - got the pix. Yours is the same as what I currently have (2.0L driver's side) ... I need the passenger side, which seem to be harder to find for some reason