I have a few extra parts from my 2056 build that were not used and looking to sell. I was told these are new Claude's Buggies' Lightened Lifters - $50 + ship
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2237_1.jpg.html
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2238_1.jpg.html
New in plastic Metal Leve Bearings (I believe / was told these are STD/STD/.25mm but I am not 100% sure of size, will see if I can find a stamping on the bearings or measure) - $50 + ship
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2245_1.jpg.html
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2250_1.jpg.html
New, in plastic Kolbenschmidt Rod Bearings, .5MM / .20" - $30 + Ship
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2254_1.jpg.html
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2255_1.jpg.html
Used 2.0L 71mm Crankshaft, was told .020" over and will likely need another turn due to surface rust on one journal (see pic). This crankshaft was coated with some sort of ceramic / teflon finish that would help oil splash return to the sump quicker (looks like silver paint) - $50 + Ship
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2241_1.jpg.html
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2242_1.jpg.html
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2243_1.jpg.html
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2244_1.jpg.html
Used camshafts. Both stamped EP93. Are these worth anything?? $5 each + ship?
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2235_1.jpg.htmlMisc. Crank Gear & Spacers - $10 + ship
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2252_1.jpg.html
Adjustable Camshaft Gear, Aluminum - $25 + ship
http://s120.photobucket.com/user/cameraman123_photos/media/IMG_2253_1.jpg.html
If you feel my prices are unfair, please make me an offer. These parts are doing no good sitting in a box in my garage. Thanks ~ Cole
Send pm for the crankshaft
Crank is pending. All else still available
A few other bits and pieces I found tonight.
Oil pickup & baffle plate ($20 each)
Another timing gear and brass distributor gear ($10 for both)2.0L Rocker Arms, Shafts and 4/8 adjusters
Bump. Make an offer
Price on the rockers?
bump
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)