I offer a GT Inspired Front bonnet hood pin kit !
Inspired from the original race cars,
I made them of stainless steel - polished up , as the alloy ones I tried
look a bit bumpy after a while
they have the bended edges as the original ones I have seen
so they are not just a flat piece
the Kit contains
* 4 polished stainless steel plates with a center hole for the pin
( You can order these with out the center hole )
all 4 plates got 4 holes in the corners for the stainless steel rivets which are incl
* 4 alloy pins , copy taken of org car
* 4 locks
* 18 4 mm rivet´s then you got 2 for spare
my advice is to mount the plates firsts , drill a hole in the bonnet for the pin and rivets
and fit the pins to match the hole afterwords, pretty straight forward
if you got a fiber decklid I would advice to use a small washer underneath the rivet
so the rivet dont shred the fiber
I will post better pics asap , but I hope you get the idea
The price is 200 EURO for a kit INCL SHIPPING - Paypal ok
By interest please send me a email to
Early911parts@gmail.com
DO note due to custom clearence , snowstorms etc you must expect up to 30 days delivery , Do Note I am from Copenhagen - Denmark
as you may say on the worng side of the pond
Regards
Marek
Attached thumbnail(s)
Beautiful and I'm on the right side of the pond!
Those look great.. Maybe someday but waaay to far off from being ready.
Email sent !
Wow, those are nice.
Excellent ! Sending email soon as I get back from RTE 66
Hey Marek: Very nice work. I made the same thing for my car some time back / Your price is spot on / very much work to make a set so you are doing the guys here a service.
Also, you suggested installation sequence is correct from my experience.
Cheers
Sidebar: My hood suffered a fall from its perch on two sawhorses when my carpark gate rolled over it while in prep for paint.... / All precipitated from the hood crest delete at Jim Hoyland's bequest .........and that started the whole hood-debacle;;;; the hood plates and pins survived...
Attached thumbnail(s)
Attached image(s)
PayPal sent
PayPal sent
Do you still have another set available? Please let me know, thanks!
-Chris
Thanks for the nice feedback
All paid orders have been shipped
Looking forward to see them mounted , pls post some pics and working experience
I have plenty on stock , so no worries
I am durring the next months lunching a bounch of GT parts
which I think you might find interesting , stay tune
Thank u all
Marek
PM sent!
Got mine in the mail today! Very nice good work Marek! Only took about 2 weeks- Very Nice! Thanks very happy.
Received my package today; excellent workmanship, best looking set I've seen; and, everything is included.
Hi Marek,
Payment sent via PayPal on 16 May for pin kit. Can you please let me know re shipping details?
Cheers
Craig
Do you still have any of these left?
Yes sir
drop me a mail early911parts@gmail.com
or drop me a PM
Marek
You mentioned other GT parts. Any plans for a cable pull headlight system?
Hi Mike
Its done will post it in the for sale section very soon
I am just waiting for the wires I order
rest is ready , and spot on
Hang on
Marek
Fantastic. PM me when you are ready to sell sets. I'm interested
Thank you,
Mike
Hello, I sent PM.
Hi Marek,
Received mine in Aus today- thanks!
Cheers
Craig
I am interested in a headlight pull assembly if that is one of the parts in the offering.
BUMP di da bum
i got a set last summer - "inspired" yes
i can't use 'em - sold car
anybody ? - make an offer
SOLD $200
.
- same shapes -
I'll still grab these Larry , Pm sent
email sent!
BUMP
Bumps :-)
SOLD _ $200
have the Marek kit - never got around to using it
- $210 - usps priority mail, - you'll have in 3 days - or best offer, "PP-friends" only
my full parts list https://tinyurl.com/911-914-Parts-List
.
are these still available?
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)