Posted by: aturboman Apr 14 2017, 04:10 PM
I'm looking for the following 914 bits:
Brake reservoir feed lines; these are the white plastic lies with the metal ends. Must be intact and undamaged.
Rear upper targa bar molding; this is the long thin aluminum molding going between the sail moldings above the engine compartment.
2 stock rear upper shock spring mounts or "hats".
I'd love NOS on all these but I'm sure I'll have to restore what I can get, so please no basket case parts.
Let me know what you have and cost.
Thanks
Posted by: bdstone914 Apr 14 2017, 08:41 PM
QUOTE(aturboman @ Apr 14 2017, 03:10 PM)
I'm looking for the following 914 bits:
Brake reservoir feed lines; these are the white plastic lies with the metal ends. Must be intact and undamaged.
Rear upper targa bar molding; this is the long thin aluminum molding going between the sail moldings above the engine compartment.
2 stock rear upper shock spring mounts or "hats".
I'd love NOS on all these but I'm sure I'll have to restore what I can get, so please no basket case parts.
Let me know what you have and cost.
Thanks
I have all of those parts. Not NOS bu I have a bunch and can sort out the best ones. I this for a -6? I know early 914 had a smaller diameter springs that needed different perches. The big spring will not work in the small perch but the small spring should work in the big perch.
Bruce
Posted by: aturboman Apr 20 2017, 10:46 AM
Hi Bruce sent you a PM, thanks