Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Gas tank vent hose for 73 2.0

Posted by: Jett May 1 2017, 10:01 PM

Looking for the plastic gas tank vent hose.

Added pic, please refer to 43/1 --- I need this smile.gif


Thanks


Attached image(s)
Attached Image

Posted by: JawjaPorsche May 2 2017, 04:57 AM

Home Depot has plastic tubing in various sizes. It is is pumbling section.

Posted by: bdstone914 May 2 2017, 07:48 AM

QUOTE(JawjaPorsche @ May 2 2017, 03:57 AM) *

Home Depot has plastic tubing in various sizes. It is is pumbling section.



Got mine at Lowes. 3/4 inch as i recall.

Posted by: porschetub May 2 2017, 03:44 PM

QUOTE(bdstone914 @ May 3 2017, 01:48 AM) *

QUOTE(JawjaPorsche @ May 2 2017, 03:57 AM) *

Home Depot has plastic tubing in various sizes. It is is pumbling section.



Got mine at Lowes. 3/4 inch as i recall.


Got mine from a pump shop and its rated for fuel /oil,not sure how long the unrated stuff would last ?
Yes 3/4'' OD ,heat it to get it on.

Posted by: raynekat May 2 2017, 06:37 PM

I'll put pics here tonight of what I just purchased that's
made for fuel, vapors, etc.

Posted by: Jett May 2 2017, 11:28 PM

Thanks... all good data but pics and stock length would help.

Posted by: raynekat May 2 2017, 11:33 PM

Attached Image

I went with this yellow tubing from McMaster-Carr.
It's PVC that is supposed to be OK with fuel, fumes, etc.

I just bought a 25' coil of the stuff and plan to use it for the vapor/vent tubing
that runs from the front trunk to the engine compartment and back.

Posted by: boxstr May 3 2017, 07:23 AM

Darren, I will look at CAMP 914 today. I have an original fuel overflow hose. I should be able to give yo the dimensions.
Craig at CAMP

Posted by: Jett May 3 2017, 09:25 AM

QUOTE(boxstr @ May 3 2017, 06:23 AM) *

Darren, I will look at CAMP 914 today. I have an original fuel overflow hose. I should be able to give yo the dimensions.
Craig at CAMP

Thanks Craig!

Posted by: Jett May 3 2017, 09:27 AM

QUOTE(raynekat @ May 2 2017, 10:33 PM) *

Attached Image

I went with this yellow tubing from McMaster-Carr.
It's PVC that is supposed to be OK with fuel, fumes, etc.

I just bought a 25' coil of the stuff and plan to use it for the vapor/vent tubing
that runs from the front trunk to the engine compartment and back.

Nice. Looks like you spent some time cadmium plating your parts smile.gif. Looks amazing!!

Posted by: Lucky9146 May 3 2017, 12:07 PM

QUOTE(Jett @ May 1 2017, 09:01 PM) *

Looking for the plastic gas tank vent hose.

Added pic, please refer to 43/1 --- I need this smile.gif


Thanks


This is an original hose, still pliable, very yellow and darker toward the top, but should be the correct length. Came off 74 2.0 PM me an offer if interested.
Attached Image

Posted by: boxstr May 3 2017, 01:25 PM

Darren, This also is an original hose. 27" long and 1/2" inside diameter.
Craig at CAMP



Attached thumbnail(s)
Attached Image

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)