Hello, looking for a set of rubber mounting washers for rear tail lights.
We need eight washers for our current 73 restoration but would love a source to buy more for our upcoming 75 restore
Here are some pics of the originals that could be saved, and the schematic --#14
914Rubber: Mark is this a part you might want to make?
Thanks
Attached image(s)
I'd just sharpen the circumference on a short length of pipe and punch out what I needed from some sheet rubber?
Check the plumbing dept at the big box stores, I bet you will find something to work. That's where I found the rubber washers for the license plate brackets.
Yes these parts are simply made. Please PM me with the diameters.
Mark
make your own from a sheet of rubber gasket material.
Harbor Freight hole punch pictured.
Or try McMaster Carr.com
https://www.mcmaster.com/#rubber-washers/=17mxmr2
Attached thumbnail(s)
Looks like Bruce has the answer no need to make these
Yes these are probably worth doing just to have it a complete kit. Sometimes you don't want to stop and have to fabricate something it can be obtained inexpensively.
Plumbing rubber washers Lowes or Home Depot
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)