Printable Version of Topic

Posted by: BillC May 14 2017, 11:45 AM

I just pulled my front bumper and valance off, to work on my front suspension. Unfortunately, I discovered that whoever had the valance off before, apparently lost the correct screws, nuts, speed nuts, washers, etc., and installed the valance with a mix-and-match variety of whatever he had lying around.

I would like to buy a set of the correct screws, speed nuts, nuts and washers needed to mount the valance correctly. If I'm reading PET correctly, there are:

• Four self-tapping screws, 4.8x16
• Four speed nuts
• Two M5x20 hex head bolts
• Two M5 hex nuts
• Six or eight flat washers
• Two split lock washers

I'll also buy assorted bits as needed to make a set. What do you have? Thanks!

Posted by: 914Sixer May 14 2017, 12:54 PM

Big box or Ace Hardware.

Posted by: bdstone914 May 14 2017, 03:22 PM

And 6mm hardware fits too.You can find a SAE sheet metal screw that i close to the metric screw.

Posted by: KENNY May 14 2017, 05:23 PM

Autoatlanta sells this set

Posted by: BillC May 14 2017, 07:48 PM

Thanks for the info. I was just hoping to buy from a World member first.

I'll try the AA kit. Just a little concerned that what they ship may not look like the picture, since it's under the "Rebuilt/Reman" heading.