Hey guys, anybody know of a source for 17mm MC rebuild kits?
Thanks
Thanks
I happened upon an Ate 17mm rebuild kit on ebay, so they're around.
It should be noted, only rebuild the MC if the bore is perfect. If there is any pitting or if you have to hone, don't risk it with a rebuild. Even then, getting the new seals on to the piston was a PITA... If possible definitely wait for the 914Rubber MC, or get a NEW Ate MC, run away from the Uro MC.
We are in the final few parts on these. Assembly and testing are only a few weeks away.
Mark
I saw this post and thought I would share that I have a new ATE 17mm rebuild kit for sale. I posted it on ebay http://www.ebay.com/itm/201951990954?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649, as well as on this site http://www.914world.com/bbs2/index.php?showtopic=311416 under the classified section.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)