Posted by: dudzy's914 May 16 2017, 01:49 PM
Looking for an Air Flow Meter for a 1975 Porsche 914 1.8l L-Jet. Must be in perfect working condition.
Thanks,
Finn
Posted by: malcolm2 May 16 2017, 01:55 PM
QUOTE(dudzy's914 @ May 16 2017, 02:49 PM)
Looking for an Air Flow Meter for a 1975 Porsche 914 1.8l L-Jet. Must be in perfect working condition.
Thanks,
Finn
They are out there. I searched and searched, ended up with 2. I thought the 1st one was crap, but it turns out I had a BAD vacuum leak.
So I ended up with a known good spare. You will find one, keep looking.
Remember, the stock 75 L-Jet AFM has 7 pins. Make sure to ask how many pins and if the flapper moves freely. Also ask if the seal has been broken on the plastic lid or if it has a "rebuilt sticker".
Let me know if you need help, I ended up learning a lot.
Clark
Posted by: dudzy's914 May 18 2017, 02:48 PM
Would also consider finding a unit with a good circuit board (any year) that I can can install in my bad unit
Posted by: Tjmrfe May 18 2017, 05:40 PM
QUOTE(dudzy's914 @ May 18 2017, 12:48 PM)
Would also consider finding a unit with a good circuit board (any year) that I can can install in my bad unit
Hi,
I have an AFM with a faulty door.(sticky) the circuit board is good.
your welcome to it, pay for shipping and it is yours for free.
Posted by: Tjmrfe May 18 2017, 05:41 PM
QUOTE(Tjmrfe @ May 18 2017, 03:40 PM)
QUOTE(dudzy's914 @ May 18 2017, 12:48 PM)
Would also consider finding a unit with a good circuit board (any year) that I can can install in my bad unit
Hi,
I have an AFM with a faulty door.(sticky) the circuit board is good.
your welcome to it, pay for shipping and it is yours for free.
its from a 75 1.8
Posted by: pete000 May 18 2017, 06:42 PM
These are actually pretty easy to tune up. Lots of videos on You Tube. I had one I thought was junk, rebuilt it and its perfect now.
Posted by: dudzy's914 May 18 2017, 07:22 PM
QUOTE(pete000 @ May 18 2017, 08:42 PM)
These are actually pretty easy to tune up. Lots of videos on You Tube. I had one I thought was junk, rebuilt it and its perfect now.
It is my circuit board that is bad but other wise is fine