Printable Version of Topic

Posted by: 74ravenna May 31 2017, 10:32 AM

Anybody have the Bracket that the AAR mounts to?


Thanks
Steve

Posted by: The Cabinetmaker May 31 2017, 10:39 AM

It is part of the Plenum

Posted by: 74ravenna May 31 2017, 12:22 PM

Good question but I don't know.

Its either part of the plenum or it mounts to one of the case bolts. I thought it mounted to the case bolt but I haven't been able to find a parts break-down online. Actually I did find it on AA's website on a parts break-down but it wasn't clear to me how it mounted. I figured I'd figure that out when I got it.

Now that you mention it I did take photos as I took it all apart. I'll have to look back and see if I captured that.

Thanks
Steve

Posted by: arne May 31 2017, 02:20 PM

Curt is correct. I've got my engine out of the car now, with the AAR on the bench. The bracket is an extension of the seam of the plenum.

Posted by: dlee6204 May 31 2017, 03:10 PM

LJet or DJet?

Djet doesn't have a separate mount


LJet has a mount

Posted by: 74ravenna May 31 2017, 03:57 PM

L-Jet

Posted by: arne May 31 2017, 04:00 PM

Oops! My bad, was thinking '74 2.0 D-jet. Carry on.