Printable Version of Topic

Posted by: sb914 Jun 18 2017, 06:15 AM

914-8 5.7 badge maybe someone has one in there stash.

Posted by: Tom_T Jun 18 2017, 01:13 PM

There was a member or 2 on here making custom CNC cut badges on here, who can probably do on for you, assuming that they're still making them now.

You'll have to get the mounting studs welded on them, or else use body trim adhesive.

Cheers!
Tom
///////

Posted by: ValcoOscar Jun 18 2017, 01:46 PM

If you have one made I can tig weld studs as Tom suggested.

Perhaps make a second, my buddy is working on his 914 V8. Shoot me cost if you find source.

Thanks

Posted by: sb914 Jun 18 2017, 03:51 PM

I tried with member here making them,but the thread is a year old
So he prob won't be making them!
Oscar I'll let you know if I source.
Thanks

Posted by: euro911 Jun 19 2017, 11:39 PM

Ask Mike Mueller

http://www.914world.com/bbs2/index.php?s=&showtopic=159774&view=findpost&p=2498424

Posted by: Mueller Jun 20 2017, 08:21 AM

thanks for the plug Mark,

I sent Eddy a PM.

The adhesive would be my choice, but if we knew the spacing you want , the studs can be done as well. The ones in the picture are .125" thick, however I can make them thicker if you want, and change the scale so they are smaller or larger than the standard 20mm height.