Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS Reproduction Engine bar bracket and hardware sets $35 a pair shipped
Posted by: bdstone914 Jun 22 2017, 09:34 PM
Edit 9-30-2018 Bump, more 10 sets reproduced in black powder coating. No zinc done at this time.
These are the brackets that attach the side shift trans type engine bar to the body.
Most are badly bent from lifting the car form the engine bar. I had these reproduced out of thicker steel and powder coated. $35 per pair shipped. I have 6 sets available.
Includes new bolts, washers and serrated flange nuts for better holding.
Bruce
Attached thumbnail(s)
Posted by: proto31 Jun 22 2017, 10:53 PM
These are really nice, I bought a set from Bruce, definitely stronger, but look identical to factory other then slightly thicker.
Posted by: euro911 Jun 23 2017, 12:19 AM
Can you set a pair aside for me, Bruce?
Hi Dan ...
Posted by: bdstone914 Jun 23 2017, 05:43 AM
Can you set a pair aside for me, Bruce?
Hi Dan ...
Yes, or.... Pay me, I send them.
Whats your address ?
Posted by: brownaar Jun 23 2017, 07:46 AM
Money sent.
Posted by: Morph914 Jun 25 2017, 07:40 PM
These are the brackets that attach the side shift trans type engine bar to the body.
Most are badly bent from lifting the car form the engine bar. I had these reproduced out of thicker steel and powder coated. $30 per pair shipped. I have ten sets available.
Sorry for the crappy pictures.
Bruce
I'll take a pair. Please send me the payment info.
Thanks,
John
Posted by: greenmachine1986 Jan 2 2018, 05:51 PM
Id like to buy a set of these, please send me payment information, thanks.
Posted by: deemsriddle Jan 2 2018, 06:24 PM
I will take a pair, if available. Please PM payment info.
Posted by: burton73 Jan 2 2018, 08:00 PM
Hi Bruce,
I would like a set for my 94 V8 car.
Thanks,
Bob B
Posted by: burton73 Jan 2 2018, 08:05 PM
Hi Bruce,
I would like a set for my 94 V8 car.
Thanks,
Bob B
is it bdstone914@aol.com
Thanks,
Bob B
Posted by: bdstone914 Jan 3 2018, 08:05 AM
Hi Bruce,
I would like a set for my 94 V8 car.
Thanks,
Bob B
is it bdstone914@aol.com
Thanks,
Bob B
Yes
Posted by: Philip W. Jan 3 2018, 08:52 AM
Bruce just sent you a pm to see if you had recoated zinc plates set but i would like a set of these, put me down for a pair and add it to my list of stash!!
Phil
Posted by: burton73 Jan 3 2018, 10:19 AM
Hi Bruce,
I would like a set for my 94 V8 car.
Thanks,
Bob B
is it bdstone914@aol.com
Thanks,
Bob B
Thanks, Payment made
Posted by: BuddyV Jan 3 2018, 05:00 PM
I need one set.
PM sent
Posted by: bdstone914 Jan 4 2018, 08:22 AM
Bruce just sent you a pm to see if you had recoated zinc plates set but i would like a set of these, put me down for a pair and add it to my list of stash!!
Phil
I do not have these plates in zinc. I now have more requests than plates.
Will have to get the fab shop to knock out another batch. I will fill the requests in the order by when they were requested.
Bruce
Posted by: bdstone914 Mar 9 2018, 08:38 AM
Bump, more sets reproduced in black powder coating or old zinc on the backets.
Posted by: BuddyV Mar 9 2018, 09:15 PM
Bruce -
I just (finally) installed my set tonite!
As always, great quality and all the parts were there.
Cheers!
Posted by: cary Jun 15 2018, 06:53 PM
bump
Posted by: bdstone914 Jun 16 2018, 07:51 AM
bump
Thanks Cary, Do you want the whole set of just the brackets alone. Deduct $10 if you do not need the hardware.
Still have about 12 pairs available. Will make more when these run out. Seems like a good seller with nearly every one on a car getting damaged by lifting the car from the engine bar.
Bruce
Posted by: cork Jun 27 2018, 02:04 PM
Bump, more sets reproduced in black powder coating or old zinc on the backets
These are the brackets that attach the side shift trans type engine bar to the body.
Most are badly bent from lifting the car form the engine bar. I had these reproduced out of thicker steel and powder coated. $40 per pair shipped. I have 6 sets available.
Includes new bolts, washers and serrated flange nuts for better holding.
Bruce
i will take a pair. need payment info. thanks cork
Posted by: JOEPROPER Jul 6 2018, 05:16 PM
Bruce, do you have a set left?
Posted by: Mikey914 Jul 7 2018, 08:32 AM
If hes' out let me know we started stocking them.
Posted by: bdstone914 Aug 12 2018, 10:00 PM
Edit 8-12-2018 Bump, more 12 sets reproduced in black powder coating. 12 bare pairs. No zinc done at this time. at this time
These are the brackets that attach the side shift trans type engine bar to the body.
Most are badly bent from lifting the car form the engine bar. I had these reproduced out of thicker steel and powder coated. $40 per pair shipped. I have 6 sets available.
Includes new bolts, washers and serrated flange nuts for better holding.
Bruce
[/quote]
Posted by: Philip W. Aug 13 2018, 10:33 AM
these are really nice, i just put a set on my car - btw, good point about jacking the car up using the engine bar. that puts all the stress on those bracket and specifically the 4 bolts that hold the bracket to the mount surface frame, NOT a good idea.
Posted by: Mikey914 Aug 13 2018, 11:00 AM
These are nice, I have a set on my car and have some n stock now so that when he's out you will still be able to get them, and or you can throw in with any other items you may need from me.
Thanks for making these Bruce
Posted by: cary Aug 13 2018, 10:11 PM
On my car too ................
Plus 2 sets in the parts bin for future work.
Posted by: bdstone914 Sep 30 2018, 02:36 PM
Bump Have ten or sets in black powder coat ready.
Posted by: bdstone914 Oct 5 2018, 07:11 AM
bump
Posted by: Literati914 Oct 20 2018, 12:34 PM
.. $40 per pair shipped. I have 6 sets available.
Includes new bolts, washers and serrated flange nuts for better holding.
Bruce
Hey Bruce, can I still get in on this? LMK.
Posted by: mmichalik Oct 20 2018, 03:19 PM
Bruce,
Please put me down for a set as well.
I will send out a PM for confirmation.
Mike
Posted by: Mblizzard Oct 21 2018, 07:32 AM
I will take a set.
Posted by: Lingcuisine Oct 22 2018, 11:48 AM
I would like a set if still available. Can you pm payment info?
Thanks Jeff
Posted by: drifter914 Oct 23 2018, 01:29 PM
Hi Bruce... PayPal sent for a set...
I have an LS-1 swap & have always worried about these engine mounts which HANG from the ears, instead of sitting on top like all other cars ! This is a very good mod to make.
Thanks... Terry
Posted by: Literati914 Nov 9 2018, 01:44 PM
Has everyone received their brackets? I ordered on 10/20 and haven't received yet.. sent Bruce a PM a few days ago w/ no reply. Just looking for an up-date.
Posted by: Literati914 Nov 21 2018, 10:59 PM
12 days since last I asked the question, and I'm still wondering if I'm the only one that has not received my brackets yet? PM'd Bruce a couple days ago again, and no answer. Anyone else in the same boat? Just looking for an update, shipping info...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)