I was using lug bolts on my 2.0 Fuchs but now the new set of wheels needs a slightly longer bolt. I would rather swap out the lug bolts for screw in studs.
i believe the size is M14x1.5. I haven't really measured length but I need studs that screw in then have enough length (little more than stock) for the wheel lug nuts. The wheels use ball seat inserts.
Anyone have a good set of 16 studs? or recommend a source? thx
I have a set of brand new studs I was going to use. They are longer than stock (I think either 60 or 80mm long) but I want to go back to stock or at least shorter.
I can get a pic at home
I use these:
https://track-studs.myshopify.com/collections/m14x1-5
I use the above mentioned ones from track-studs as well. Very pleased
Found this thread, and it had exactly what I was looking for. Even the link is still good!
Love 914World
I feel safer with the pressed in studs, here are some if you're the same:
https://swayaway.com/product-category/axles/axle-vw/wheelstuds/
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)