Printable Version of Topic

Posted by: Ed_Turbo Jul 7 2017, 11:51 AM

Hey guys I am looking for an original gas pedal in good condition and I want to replace this garden looking hose ( I think it is called an air intake sensor hose?) with an original braided one if I am not mistaken:



Show me some pics and quotes. Thanks fellas.

Posted by: The Cabinetmaker Jul 7 2017, 11:57 AM

braided hose available at any bug shop. Sells by the meter. Bughaus, busdepot, etc. New gas pedal available at 914 rubber, or pelican, or etc. Buy new ones

Posted by: euro911 Jul 7 2017, 12:39 PM

No one is going to pop the linkage off of an accurately reproduced 914 rubber gas pedal to see if it has the factory # on the back - just sayin'

Posted by: Ed_Turbo Jul 11 2017, 09:31 PM

Bump to the top..

Anyone with an original pedal? PM me

Posted by: ndfrigi Jul 11 2017, 09:49 PM

http://shop.914rubber.com/914-Gas-pedal-914GP.htm

Posted by: kkid Jul 12 2017, 12:36 AM

While you are here, you will WTB air cooling flaps for your motor.

Posted by: bdstone914 Jul 12 2017, 05:16 AM

What he is pointing out is that the air flap rod and flaps is missing. Very important as without them air does not go thru the oil cooler. Add them before you burn up your engine. You are probably missing the thermostat assembly too.

Posted by: bdstone914 Jul 12 2017, 05:26 AM

Original gas pedals are about $100 new. What do you figure a used original is worth when you can buy a new afternarket one for under $30? Remember the reason you're replacing the original one is that they fail internally from rust.

Posted by: Mikey914 Jul 12 2017, 09:04 AM

Ahhhhh ............ $20 too much for ya? If you want I can charge $90 if it makes you feel better

http://shop.914rubber.com/914-Gas-pedal-914GP.htm?categoryId=-1

I'd bet you can't tell the difference


Attached thumbnail(s)

Posted by: mb911 Jul 12 2017, 10:22 AM

I actually have an NOS pedal with the stickers still on it. Pm me if interested. I would then buy Mark's .