914World.com [Powered by Invision Power Board]

Posted by: Bill's Racing 914 Jul 22 2017, 08:15 PM

All parts come from a 1970 Porsche 914-4

All parts include shipping:

refurbished distributor for fuel injected engine Bosch part no. : 0 231 174 001 VW Part no.: 022 905 205 F - $115
Core distributor for fuel injection engine Bosch part no.: 0 231 174 007 VW part no.: 022 905 205 Q - $35
Top latches on is missing a handle $40
Chrome top latches with hardware $50
Transmission clutch arm $30
Used throw out bearing(still good) from a working engine $45
Pair of chrome headlight rims $65
Heater bellows $90
Remote oil filter mount $30
Throttle body $65
Complete Left door handle $100
Partial Left door handle. Has hairline crack on one of the hinge clevises. Only good for the lock mechanism. $40
Heater handle $50
Motor mounts $30 (SOLD)
Clutch cable pulley $30
Working horn $40 (SOLD)
Seat belt $50 (SOLD)
Working heater fan $65
Hella fog light glass $40
Pair of fiberglass headlight eyelids $50
Heater valve with cables $40 (SOLD)
Pair of non-OEM door window squeegees new in package 914-531-873-10 -M136 and 914-531-874-10 -M136 $40 for the pair (SOLD)

Paypal only. PM me your mailing address and I will send you my Paypal email for the payment.

Attached thumbnail(s)

Posted by: bdstone914 Jul 23 2017, 02:04 PM

Hi Bill,
You should add the parts number in the distributors. 1.7 are D jet with trigger points. 1.8 are for L jet with no trigger points. Ones with good vacuum pots are hard to find and the cans are NLA. Good luck with sale.

Posted by: Bill's Racing 914 Jul 23 2017, 05:22 PM

QUOTE(bdstone914 @ Jul 23 2017, 01:04 PM)

Hi Bill,
You should add the parts number in the distributors. 1.7 are D jet with trigger points. 1.8 are for L jet with no trigger points. Ones with good vacuum pots are hard to find and the cans are NLA. Good luck with sale.

Bruce,

Thanks!

Bill

Posted by: steuspeed Jul 23 2017, 08:59 PM

Is that the correct heater handle for the console. I think they are different?

Posted by: Woodside914 Jul 23 2017, 10:35 PM

Pair of door window squeegees new in package 914-531-873-10 -M136 and 914-531-874-10 -M136 $40 for the pair

IF these are Unused OEM original, consider them SOLD....can you please send me PM to confirm?

Posted by: Mikey914 Jul 23 2017, 10:43 PM

You can tell from the cut the are not the early.
Is this what you are looking for ?
They are correct for the 70. The 911 style superseded them. That's whats in the picture above.

Attached image(s)

Posted by: Mikey914 Jul 23 2017, 10:48 PM

They appear to be the superseded profile but NOS

Attached image(s)

Posted by: Mikey914 Jul 23 2017, 10:50 PM

I'll take the belts if available

Posted by: Woodside914 Jul 25 2017, 04:16 PM

QUOTE(Woodside914 @ Jul 23 2017, 09:35 PM)

Pair of door window squeegees new in package 914-531-873-10 -M136 and 914-531-874-10 -M136 $40 for the pair

IF these are Unused OEM original, consider them SOLD....can you please send me PM to confirm?

Thanks for the reply email ~ based on these being aftermarket rubber parts, I'm going to pass.

Squeegee Parts are still available, Folks.

Posted by: Bill's Racing 914 Aug 6 2017, 12:44 PM

Bump...

Posted by: bbrock Aug 7 2017, 12:21 AM

PM sent on partial door handle. I'm looking for a right.

Posted by: Bill's Racing 914 Aug 14 2017, 09:14 AM

QUOTE(Bill's Racing 914 @ Aug 6 2017, 11:44 AM)

Bump...

Bump again....

Posted by: sb914 Aug 14 2017, 09:39 AM

Do you live in seal beach? Think I met you at BofA one day
I was in my 73 2.0

Posted by: 914fun Aug 15 2017, 02:31 AM

Sent pm for Heater valve with cables $40.

Posted by: Bill's Racing 914 Aug 19 2017, 12:34 PM

QUOTE(914fun @ Aug 15 2017, 01:31 AM)