This is a set of 4 replicas that had tires mounted, and were installed on a LWB longnose, that would have needed 8mm spacers to fit them. The buyer didn't want that, so these are now for sale in 'almost new' condition.
These fit SWB cars/brakes perfectly, as they are the same design as the 7R made for the 911R. On later narrow body cars, as mentioned, you need a small spacer to clear the calipers. These have the same dish as a deep 6 Fuchs.
New, these cost $450 each plus $20 shipping. I am willing to take $400 each on these, so someone gets a great discount on a cool set of wheels.
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0486_zps1fp155ir.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0487_zpsmo3ioeo3.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0488_zps9qi220o0.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0489_zpsewvnvu8f.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0490_zpsxk7wrmyw.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0491_zpsynkyfibj.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0492_zpsz2wj27gy.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0493_zpsvbaaf3j1.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0494_zpsvptfb0tg.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0495_zpsgxwdoprt.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0496_zpsqtqtbegw.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0497_zpspj8uscev.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0498_zpsrrjeskij.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0499_zpsefsek9nk.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0500_zpsmssg5ksq.jpg.html
http://s61.photobucket.com/user/greggearhead/media/Sell/Wheels/DSC_0501_zpsudtcckex.jpg.html
I also have a brand new set sitting here, if someone wants a few sets for a race car all at once, etc. Or can order more.
Sent you PM on Early S registry. Crazy I posted here....
Yeah, it's been kind of Twilight Zone here lately.
All PM you here on 914 World instead.
Yes, they are Maxilite. I am a dealer for them and carry Fuchs in all sizes and finishes, as well as wheels for Alfa, etc. I can get anything they sell in Europe, as well.
These weigh 15lbs 6oz on my postal scale. Pretty darned good for a pressure cast 15x7 Fuchs.
What size and type of center cap do they need?
They use factory ring-type fuchs center caps. So easy to find and not all that expensive.
Also factory ball seat lugs, for that matter.
This set is sold.
I have one new set on the shelf here, but can obviously sell more from the warehouse if someone needs.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)