Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FS: 2.7 Engine from '76 911
Posted by: Mike Fitton Sep 11 2017, 08:09 PM
Just pulled this engine (2.7) from my 914-6 I was running webers on it. Car ran great but just rebuilt the original 2.0 engine from my 914-6 and reinstalled it. Compression numbers before I pulled it were 90-105 and it did have some leaks so I would do rebuild before installing. That being said I drove my car on several long trips and never had any problems. Engine is at my mechanics shop on a pallet. Air box bases and venturi's are not included with sale. Buyer to make arrangement for shipping. Price is $4,800. now $4,200.
[attachmentid=619
838]
Attached image(s)
Posted by: 914_teener Sep 11 2017, 08:46 PM
Posted by: Coondog Sep 11 2017, 08:55 PM
Great price...... 
Posted by: forrestkhaag Sep 12 2017, 10:09 AM
that is a good deal!
Posted by: Mike Fitton Sep 12 2017, 01:43 PM
Engine number is: 6360990. You can throw some webers on this engine at start driving tomorrow. Only had a small oil leak the size of a quarter after driving. Attached the receipt for the work that was done at the end of 2014.
Posted by: 914forme Sep 15 2017, 04:47 PM
That is a great deal
Posted by: Mike Fitton Sep 22 2017, 01:05 PM
Bump, ready to go. Offers?
Posted by: Mike Fitton Oct 3 2017, 02:49 PM
Bump, offers ok. On Pallet ready to ship.
Posted by: Mike Fitton Nov 17 2017, 09:13 AM
One last bump before I start to part this out. New price is $4,200.
Posted by: Mueller Nov 17 2017, 02:30 PM
Seems like great deal, why no takers?
Posted by: mph911 Nov 17 2017, 03:36 PM
Id be interested, but shipping would kill me to Australia
Posted by: Mike Fitton Nov 17 2017, 03:44 PM
If someone wants to check on shipping cost, this on a std. pallet 48" x 40" figure 30" high and weight is 350lbs. Here is a sight to check pricing: https://freightorgator.com/
Posted by: davehg Nov 17 2017, 04:00 PM
Great price - I just paid $3000 for a 2.7 that is now completely disassembled but had Nikisil, case savers, new studs, and a rebuilt top end- but I added a new crank, new Solex cams, new Euro/RS pistons and a newly rebuilt Weber - so the total was $7k plus the cost to rebuild.
A full rebuild on this engine by a pro shop would probably run $4k (more if additional work needs to be done - up to $8k total), plus the cost of new carbs.
What cams are on this motor? If these are original CIS cams, they may need to be reground to accommodate Webers.
Posted by: Mike Fitton Nov 17 2017, 05:02 PM
Great price - I just paid $3000 for a 2.7 that is now completely disassembled but had Nikisil, case savers, new studs, and a rebuilt top end- but I added a new crank, new Solex cams, new Euro/RS pistons and a newly rebuilt Weber - so the total was $7k plus the cost to rebuild.
A full rebuild on this engine by a pro shop would probably run $4k (more if additional work needs to be done - up to $8k total), plus the cost of new carbs.
What cams are on this motor? If these are original CIS cams, they may need to be reground to accommodate Webers.
Was running with webers when in my car so what ever needed to be done to accommodate Webers was already done, I don't have much history on the engine previous owner also bought it with the 2.7 installed.
Posted by: Mike Fitton Nov 17 2017, 07:25 PM
Add up the cost of the parts, this is a great deal!
Posted by: JmuRiz Nov 17 2017, 08:16 PM
Totally agree, that's low core pricing for a good long-block with fan!
Slap on some webers or a CIS and you're good to go...if mine wasn't at the 4 corners of the USA being rebuilt I'd be all over it! I'd probably make out $10k in the black if I bought this one to begin with.
Almost tempted to buy it for my '74 911 that has a 3.0 in it now...sometimes buyers want the stock size engine.
Posted by: 914forme Nov 17 2017, 08:29 PM
Some one please buy this I don't need a 3rd engine. This would get me on the road next spring.
Posted by: Mike Fitton Dec 3 2017, 09:53 PM
Bump, still available.
Posted by: Mike Fitton Dec 18 2017, 09:21 AM
Engine has been sold, going to a member here. Thanks!
Posted by: Dr Evil Dec 27 2017, 01:21 PM
Engine has been sold, going to a member here. Thanks!
Oh thank goodness. I didn't need it, but a good deal. Also, per your receipt, I need to charge more
I just did this and more for a friend and am only charging parts. Its a labor of love.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)