Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ Rear 'C' shaped clip for radio

Posted by: Rob-O Sep 19 2017, 05:50 AM

Looking for one of the 'C' shaped clips that clip onto the radio. The clip has two small tabs that then attach to the firewall behind the dash.

Posted by: Tom_T Sep 19 2017, 10:32 AM

If you can't find one Rob, then you might be able to fab one if someone else has oe to model from, &/or if you can measure one up to fab.

You might also try Bruce Stone/bdstone on here, Rich Bontempi at HPH (High Performance House) in Redwood City CA, & AA - cuz they all have big parts stashes.

Good Luck! beerchug.gif
Tom
///////

Posted by: Mike Fitton Sep 19 2017, 02:32 PM

Is this what you are looking for?


Attached Image

Posted by: Rob-O Sep 19 2017, 03:53 PM

It looks like the part in this picture that the red wire is around. On the backside of the clip, the part you can't see, there are two clips that fit into the two holes on the firewall behind the radio.

I used to have one of these clips, but can't find it!


Attached image(s)
Attached Image

Posted by: Mike Fitton Sep 19 2017, 04:36 PM

I don't believe the back of your radio will reach far enough to clip into that C bracket if attached to the firewall. You need the above bracket I posted above attached to the back of the radio to extend it then it gets mated to the C bracket attached to the firewall. So I think you need both, anyone else know?

Attached Image

Posted by: Jett Sep 19 2017, 07:49 PM

Correct, my 73 stock radio has both.

QUOTE(Mike Fitton @ Sep 19 2017, 03:36 PM) *

I don't believe the back of your radio will reach far enough to clip into that C bracket if attached to the firewall. You need the above bracket I posted above attached to the back of the radio to extend it then it gets mated to the C bracket attached to the firewall. So I think you need both, anyone else know?

Attached Image


Posted by: 914Sixer Sep 19 2017, 09:40 PM

There is two versions of the C clip. A long one and a short one. The radio also needs a C clip on the back too. Added pictures of sizes and radio c clip installation location.


Attached image(s)
Attached Image Attached Image Attached Image Attached Image

Posted by: Rob-O Sep 20 2017, 10:35 AM

I appreciate the great information. I have a Blaupunkt Frankfurt I just picked up that is in need of repair. It has a hole smack dab in the middle in the back which looks like it would accept the clip that attaches to the radio. So my guess is I'll definitely need that part. After that I think I'll need the short black clip. Mike you sell a ton of Blaupunkts here, is the clip for the back of the radio you posted for sale?

I'm also on the lookout for speaker wires (my Frankfurt is a stereo unit) if anyone has the wires...

Posted by: 914Sixer Sep 20 2017, 11:23 AM

4 wire plug for speakers is available one Ebay for $68.

Posted by: Mike Fitton Sep 20 2017, 01:56 PM

QUOTE(Rob-O @ Sep 20 2017, 08:35 AM) *

I appreciate the great information. I have a Blaupunkt Frankfurt I just picked up that is in need of repair. It has a hole smack dab in the middle in the back which looks like it would accept the clip that attaches to the radio. So my guess is I'll definitely need that part. After that I think I'll need the short black clip. Mike you sell a ton of Blaupunkts here, is the clip for the back of the radio you posted for sale?

I'm also on the lookout for speaker wires (my Frankfurt is a stereo unit) if anyone has the wires...



That was an old picture but i may still have one, no C clip though. Are you looking for these type of speaker plugs?

Attached Image

Posted by: Rob-O Sep 20 2017, 02:38 PM

Yessir. I have four round holes on my Frankfurt for the speakers. it looks like the later style was a pin and a flat male spade connector. I definitely do not have that type.

Posted by: Mike Fitton Sep 20 2017, 02:46 PM

QUOTE(Rob-O @ Sep 20 2017, 12:38 PM) *

Yessir. I have four round holes on my Frankfurt for the speakers. it looks like the later style was a pin and a flat male spade connector. I definitely do not have that type.



Ok, I will check tonight to see what I have.

Posted by: Rob-O Sep 20 2017, 02:53 PM

Thanks Mike.

Posted by: Mike Fitton Sep 20 2017, 05:04 PM

Here is what I have, not sure how much to ask. How about $25 including shipping?

Attached Image

Posted by: Rob-O Sep 20 2017, 05:33 PM

Deal

Posted by: 914 Sep 21 2017, 03:41 PM

Mike,
Do you have any more C clips for the that mount to the rear of the radio??
Thanks,914/Alan

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)