I'm cleaning out my parts stash. happy to discount for anyway you make my life easier (local pickup, combined shipping, ???). All prices "plus shipping". PM me for pic requests, include an email. Guide to condition:
New/Excellent
Great
Good
Fair
Poor (generally I wouldn't have kept a poor condition part or would give away for free)SOLD Hi Torque Starter from Pelican - brand new!! - $250 shipped - bought this for a 6 conversion but won't be using it. I've had it too long to return to Pelican. Pelican lists at $355
8qts Brad Penn 20W/50 oil plus mahle OC28 filter and 2 Reinz sump gasket sets - $50
'72 4-lug rear hubs pair - great condition - $50 shipped - no rust, nice and clean, priced as cores
901/914 trans flange pair - good condition - $40 shipped - exposed portion showing oxidation
front spare hold down - good condition - $20 shipped
frunk latch set - fair condition - $20 shipped - upper is good, lower is dented w/ some red overspray
combo/fuel gauge - works, but fair condition - $20 - ring is rusty, face is faded
***Newly added items ***
front calipers from a 72 - great condition - $60 shipped - still plenty of plating left, you can see the bleeders are silver. Plenty of pad left, I can take a pic if you want
tunnel carpet piece - good condition - $30 shipped
***Newly added items ***
lowered prices, free shipping, pics below of these itemsSOLD umbrella cover - brand new!! - $125 - I paid $135 two months ago, from Perry, new, unused, latest 'pinpoint' fabric SOLD white headlight surrounds - great condition - $50 - faded with age like they all are, no cracks, splits or breaksSOLD e-brake handle boot/cover - great condition - $10 from the early folding leverhella side-markers "warts" - great condition - $35 - R & L, lenses, bases, bulbsSOLD early basketweave passenger door vinyl - $20 - was going to use this to restore the dash. The true correct dash vinyl is not available from any vendor no matter what they say. I ordered them all and none were right. I bought this door vinyl here after measuring and realizing I could do a full dash easily with a right side door vinyl.SOLD late e-brake handle - good condition - $25 - a quick respray would make it great!SOLD fog lights with new seal kit - fair condition - $60 - reflectors are good, rusting under the seals, overspray on the backside, but look good from the front. I was going to refinish. 2 good lenses, new seal kits from Mark.SOLD partial toolkit - fair condition - $50 - no tears in roll, included tools are in good usable condition but showing expected oxidation
- vinyl roll
- reversible screwdriver
- spark plug wrench
- lug nut wrench
- lever tool for the previous 2 items
- 8/10mm combo wrench
- little spanner thingSOLD large flat-rate box of D-Jet 1.7 - various condition - $75
- black coil - was working when I pulled it off
- 005 dizzy of unknown condition
- FPR - unknown
- TPS - unknown, but bench tests fine
- thermo time switch - unknown
- engine harness (no ecu) - good connectors, sleeves and boots, wires are stiff but still usable.
- 14-pin side of engine harness - same condition as engine harness
- misc hose pieces and lots of vacuum hose connectors, some new
- some used, some new, rotors, points & condenser
- battery to starter cable
PM on the fog lights - thanks
PM for E brake HANDLE
Thanks
I'll take the white headlight surrounds pending photos... PM sent.
Brad, I’ll take the umbrella cover. Please add to my stash.
I’ll text when we get home.
I'll take the
e-brake handle boot/cover - great condition - $10 from the early folding lever
Interested in tool kit. Sent you a message.
PM sent for Djet parts
early basketweave passenger door vinyl - $20 - was going to use this to restore the dash. The true correct dash vinyl is not available from any vendor no matter what they say. I ordered them all and none were right. I bought this door vinyl here after measuring and realizing I could do a full dash easily with a right side door vinyl.
I would like this please.
Inglewood, CA 90302
Bob B
bump to the top for lowered prices (listed at the top), free shipping, and pics
more pics...
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)