Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ SOLD: 6 conversion parts
Posted by: bradtho Oct 23 2017, 10:24 PM
I hate to compete against our member vendors but I need to liquidate my parts stash. These parts are all brand new unused. I'm under-cutting the list price and offering free shipping.SOLD 914-6 engine tin - new - got these from Rich, never used them. - $400 shippedSOLD 914-6 accelerator linkage for DME/motronic - new - got this from Rich also, also never used. - $300 shippedSOLD 914-6 rear rotors - new - got these from Eric/PMB, never used. - $125 shippedSOLD 2.0 liter muffler hanger (for 6 conversion) - new - from Pelican. - $45 shipped
Posted by: bradtho Oct 23 2017, 10:24 PM
Posted by: Mitox Oct 23 2017, 10:41 PM
I'll purchase the engine tin at $400.
Sending a PM also.
Posted by: JmuRiz Oct 24 2017, 07:52 AM
Do you know if the throttle linkage works with carb'd cars?
If so, I'll take it.
I seem to remember Rich only had one kit that worked with all. I can always check with him if you're not sure.
Posted by: gcrotvik Oct 24 2017, 07:52 AM
I will take the "2.0 liter muffler hanger (for 6 conversion) - new - from Pelican. - $45 shipped" PM sent.
Posted by: bradtho Oct 24 2017, 08:14 AM
Do you know if the throttle linkage works with carb'd cars?
If so, I'll take it.
I seem to remember Rich only had one kit that worked with all. I can always check with him if you're not sure.
I assume they are different since the price varies (http://www.914world.com/bbs2/index.php?showtopic=4319&hl=), I'll ask him since I need to get another copy of the instructions I lost at the shop.
Posted by: JOEPROPER Oct 24 2017, 08:30 AM
Late to the party, but 2nd on tins, linkage and muffler bracket...
Posted by: Mitox Oct 24 2017, 10:18 AM
I'll purchase the engine tin at $400.
Sending a PM also.
Just sent payment via PayPal
Thanks
Posted by: bradtho Oct 24 2017, 10:42 AM
Do you know if the throttle linkage works with carb'd cars?
If so, I'll take it.
I seem to remember Rich only had one kit that worked with all. I can always check with him if you're not sure.
I assume they are different since the price varies (http://www.914world.com/bbs2/index.php?showtopic=4319&hl=), I'll ask him since I need to get another copy of the instructions I lost at the shop.
I got a PM response from Rich, "The DME kit has a longer rod and requires a small mod. to the DME linkage bracket on top of the engine."
Mitox is currently first in line.
Posted by: mepstein Oct 24 2017, 11:16 AM
Do you know if the throttle linkage works with carb'd cars?
If so, I'll take it.
I seem to remember Rich only had one kit that worked with all. I can always check with him if you're not sure.
I assume they are different since the price varies (http://www.914world.com/bbs2/index.php?showtopic=4319&hl=), I'll ask him since I need to get another copy of the instructions I lost at the shop.
I got a PM response from Rich, "The DME kit has a longer rod and requires a small mod. to the DME linkage bracket on top of the engine."
Mitox is currently first in line.
On my 3.2, You had to put the ball on the throttle plate that sits in the socket on the throttle rod on the other side of the plate. Sierra Madre makes a kit but it only took our welding guy a minute to make the change.
Rich’s conversion parts are all very nice. I had doc evil replace the intermediate plate on my trans with a 911 unit so I didn’t have to use the adaptor but the trans was getting overhauled anyway. The adaptor makes it a 5 minute install.
I powder coated the engine tin but realized o needed a cutout for one of the sensors. Best to fit and modify before powdercoat.
Posted by: Mitox Oct 24 2017, 12:09 PM
Brad,
I'll take the linkage also. The payment will go through this evening.
Thanks
Michael
Posted by: Mitox Oct 24 2017, 04:57 PM
Brad,
I'll take the linkage also. The payment will go through this evening.
Thanks
Michael
Payment for the linkage is complete via PayPal
Thanks,
Posted by: bradtho Oct 26 2017, 11:04 AM
bump for the rotors. be ready for the future with a spare set! I need these gone.
Posted by: Mitox Nov 1 2017, 07:39 PM
The parts arrived today, a few more of the key parts checked off of the list.
Thanks
Michael
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)