Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ FOUND: WTB: Floor drain bungs and carpet hold downs
Posted by: bbrock Nov 12 2017, 08:59 PM
I'm getting ready to replace my floor and would like two of the floor drain bungs to replace my rusted ones, and 3 or 4 of the carpet buttons that weld onto the floor. The one pictured below could probably be reused in a pinch, but my other three are shot and I'd like to replace all 4. I haven't found a source for either of these items so am trying here. Thanks.
Posted by: burton73 Nov 12 2017, 10:53 PM
Brent,
My 6 had good ones but I have got them before on EBay. I looked around and cannot find any on line but maybe Garold or Bruce Stone may have a used one. Most California cars have good ones.
The Bird has them as Floor Plate, Lid - Nos - Genuine Porsche $35.
When you are not looking one will come up
Bob B
Part No 91455924710
Posted by: bbrock Nov 13 2017, 01:01 AM
Brent,
My 6 had good ones but I have got them before on EBay. I looked around and cannot find any on line but maybe Garold or Bruce Stone may have a used one. Most California cars have good ones.
The Bird has them as Floor Plate, Lid - Nos - Genuine Porsche $35.
When you are not looking one will come up
Bob B
Part No 91455924710
Thanks Bob! Looks like the bird will be my safety net if nothing turns up here or on ebay.
Posted by: euro911 Nov 13 2017, 08:13 AM
Shoot Garold Schaffer a note, I'll bet he has some
Posted by: bbrock Nov 15 2017, 04:44 PM
Shoot Garold Schaffer a note, I'll bet he has some
I did and he did. Great price too. Thanks Mark!
Posted by: Puebloswatcop Nov 15 2017, 08:01 PM
Hey Brent, did you get all of the parts you needed, I may have some if not
Posted by: bbrock Nov 15 2017, 11:12 PM
Hey Brent, did you get all of the parts you needed, I may have some if not
I did. Garold had all the bits. Thanks.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)