Printable Version of Topic

Posted by: siverson Nov 15 2017, 03:34 PM

Anyone have one? How much including shipping to 92024?

Thanks,
Steve




Attached image(s)

Posted by: siverson Nov 15 2017, 03:35 PM

I need it for the front trunk, but I think front and rear are the same...

-Steve

Posted by: gcrotvik Nov 15 2017, 04:29 PM

Hi Steve,

Yes, the front and rear are the same. PM me your address and I will send you one. It will be Saturday before I get to my garage. Hope that's OK.

Greg

Posted by: Perry Kiehl Nov 15 2017, 08:09 PM

There's a mod I've done to those bolts, I read about it in Up Fixin Der Porsche. You chuch up the bolt and cut a small groove in the shoulder, then drill a small hole across the bolt, right in the groove, and then drill another hole down the top of the bolt, (intersecting with the small cross hole) for a grease fitting.

Posted by: bdstone914 Nov 16 2017, 08:58 AM

They are a self locking bolt with a nylon button in the threads. If reusing a used on put blue Loctite on the threads. New hinges come with new bolts.

Most used ones get rust and wear. J West makes better hinges.


Attached thumbnail(s)

Posted by: siverson Nov 16 2017, 12:25 PM

Thanks everyone and especially Greg/gcrotvik! (he has one)

Steve

Posted by: jim_hoyland Nov 16 2017, 07:08 PM

I came across one of these bolts the other day while organizing loose parts. Knew it was Porsche, but couldn’t remember where it came from


Attached image(s)

Posted by: Tbrown4x4 Nov 17 2017, 05:50 AM

Looks like the bolt that came with my RD trunk hinge pivots.

Posted by: gereed75 Nov 17 2017, 08:36 AM

Now that Steve has his, I need one too. Price and Shipping to 15025??