Starting my hunt for a 2.4 T 7r block
Let me know if you have one and how much please!
PNW preferred... if i can be that picky
not even a comment from the peanut gallery??
Supertec has a few on their shelves..
My brother has that case. How much are you willing to pay for that case
I have these two cases for sale.
Attached image(s)
I've seen 7R cases go anywhere from $1k to $15k (asking price).
And a lot in between.
Good luck with the search.
I also need a 2.4 small spigot 7r block
Post a follow up if you don’t mind.
Good block. Still needs alot of machine work
[quote name='pete-stevers' date='Dec 2 2017, 06:57 PM' post='2554272']
[quote name='briansmachine' post='2554224' date='Dec 2 2017, 01:25 PM']
My brother has that case. How much are you willing to pay for that case
[/quote]
I am not willing to take a chance purchasing any parts from a lurker... sorry, spend some time and post a bit in the community first, thanks a ton! unless of course you are a regular on the bird board
Mep, you have a pm
I will talk with Henry as well
DUDE!!!
I think that you just called me a lurker.
Mister Stevers , if that is your name please do your research before you go out name calling. I have been on here since may of 2010 and I run a licensed repair business in Connecticut specializing in Porsche for 39 years and have been member of CVR Porsche club since 1978.
And ideally you could have gotten that case from me for a real good deal since I have been instrumental in providing quality parts and service for the better part of the 39 years that I have been in business but after your little rant here my price to anyone but you will be very reasonable you however can be assured that I may not be giving any deals to you.
I have one.
Also have crank, rods, oil pump, int shaft, heads, etc...
Email me and I will send pics.
Bk911@hotmail.com.
Brian
[quote name='briansmachine' date='Dec 2 2017, 08:39 PM' post='2554354']
[quote name='pete-stevers' date='Dec 2 2017, 06:57 PM' post='2554272']
[quote name='briansmachine' post='2554224' date='Dec 2 2017, 01:25 PM']
My brother has that case. How much are you willing to pay for that case
[/quote]
I am not willing to take a chance purchasing any parts from a lurker... sorry, spend some time and post a bit in the community first, thanks a ton! unless of course you are a regular on the bird board
Mep, you have a pm
I will talk with Henry as well
DUDE!!!
I think that you just called me a lurker.
Mister Stevers , if that is your name please do your research before you go out name calling. I have been on here since may of 2010 and I run a licensed repair business in Connecticut specializing in Porsche for 39 years and have been member of CVR Porsche club since 1978.
And ideally you could have gotten that case from me for a real good deal since I have been instrumental in providing quality parts and service for the better part of the 39 years that I have been in business but after your little rant here my price to anyone but you will be very reasonable you however can be assured that I may not be giving any deals to you.
[/quote]
Hey Brian, With all the scam artists out there that reply to wanted ads I just don't, as a policy buy from guys who don't have any post history. I did not intend for you to take offence to it, but a lurker ...if I am not mistaken is a technical term used for a person with no posts, not a term I use in a negative sense.
I bet in your shop you much prefer to deal with a customer with history, than a guy fresh off the street.
My apologies if I offended you.
That is why I posted here in the 914 world rather than Pelican as I know a few of the sordid individuals here, and they know of me. It is like a big ole family in here .... and sometimes we step on each others toes in the process.
Peace to you!
Found a couple more. I don’t believe any are a 7R. The only history I have on them is we purchased them from another shop a year ago. They were bare when we got them. I would remove the head studs to ship since they usually are bent during shipping and are rusty. The T cases are $1200, the E cases are $1,800.
Attached image(s)
On Bay: https://www.ebay.com/itm/Porsche-911-1973-CIS-Magnesium-7R-engine-case-small-spigot-2-0-2-4-lightweight/121976391603?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D49454%26meid%3Dd5d326e739c84eb48e813e1ac5f8f1f7%26pid%3D100675%26rk%3D1%26rkt%3D15%26sd%3D121976391603&_trksid=p2481888.c100675.m4236&_trkparms=pageci%253Addec95fd-d867-11e7-8aec-74dbd18045d9%257Cparentrq%253A1e0c8dc51600ab6b34913b2afff7ab15%257Ciid%253A1
Pricy but there's been a lot of work been done to it.
Building up from a case is the most expensive way to build. A core is usually less total cost and a good running engine is probably the most economical way to go.
That being said, if I had a bottomless wallet, I would have Henry at Supertec build me one of his specials.
At that price I should just sell my fresh 2.4 build..
[quote name='pete-stevers' date='Dec 3 2017, 12:51 PM' post='2554495']
[quote name='briansmachine' date='Dec 2 2017, 08:39 PM' post='2554354']
[quote name='pete-stevers' date='Dec 2 2017, 06:57 PM' post='2554272']
[quote name='briansmachine' post='2554224' date='Dec 2 2017, 01:25 PM']
My brother has that case. How much are you willing to pay for that case
[/quote]
I am not willing to take a chance purchasing any parts from a lurker... sorry, spend some time and post a bit in the community first, thanks a ton! unless of course you are a regular on the bird board
Mep, you have a pm
I will talk with Henry as well
DUDE!!!
I think that you just called me a lurker.
Mister Stevers , if that is your name please do your research before you go out name calling. I have been on here since may of 2010 and I run a licensed repair business in Connecticut specializing in Porsche for 39 years and have been member of CVR Porsche club since 1978.
And ideally you could have gotten that case from me for a real good deal since I have been instrumental in providing quality parts and service for the better part of the 39 years that I have been in business but after your little rant here my price to anyone but you will be very reasonable you however can be assured that I may not be giving any deals to you.
[/quote]
Hey Brian, With all the scam artists out there that reply to wanted ads I just don't, as a policy buy from guys who don't have any post history. I did not intend for you to take offence to it, but a lurker ...if I am not mistaken is a technical term used for a person with no posts, not a term I use in a negative sense.
I bet in your shop you much prefer to deal with a customer with history, than a guy fresh off the street.
My apologies if I offended you.
That is why I posted here in the 914 world rather than Pelican as I know a few of the sordid individuals here, and they know of me. It is like a big ole family in here .... and sometimes we step on each others toes in the process.
Peace to you!
[/quote]
Well Pete I have had a few sordid replys from some of those individual;s and I do my homework to make sure that they are real and if they are not I just ignore their posts.
If you have done the same you would have found out from my personal info on here that I am a real and verifyable business and have been working with Porsche clients for a long time and run a very respectable and honest business.
Here is a link to my Pelican parts profile that shows 3 pages of items that I have sold an purchased on that site. http://forums.pelicanparts.com/search.php?searchid=16928055.
That being said I accept your apology.
Brian Blake (owner operator of Brians Machine Service located in South WIndsor Ct. An independant auto repair and specialty manufacturing business doing business for the better part of half a century.)
[quote name='briansmachine' date='Dec 4 2017, 09:28 AM' post='2554733']
[quote name='pete-stevers' date='Dec 3 2017, 12:51 PM' post='2554495']
[quote name='briansmachine' date='Dec 2 2017, 08:39 PM' post='2554354']
[quote name='pete-stevers' date='Dec 2 2017, 06:57 PM' post='2554272']
[quote name='briansmachine' post='2554224' date='Dec 2 2017, 01:25 PM']
My brother has that case. How much are you willing to pay for that case
[/quote]
I am not willing to take a chance purchasing any parts from a lurker... sorry, spend some time and post a bit in the community first, thanks a ton! unless of course you are a regular on the bird board
Mep, you have a pm
I will talk with Henry as well
DUDE!!!
I think that you just called me a lurker.
Mister Stevers , if that is your name please do your research before you go out name calling. I have been on here since may of 2010 and I run a licensed repair business in Connecticut specializing in Porsche for 39 years and have been member of CVR Porsche club since 1978.
And ideally you could have gotten that case from me for a real good deal since I have been instrumental in providing quality parts and service for the better part of the 39 years that I have been in business but after your little rant here my price to anyone but you will be very reasonable you however can be assured that I may not be giving any deals to you.
[/quote]
Hey Brian, With all the scam artists out there that reply to wanted ads I just don't, as a policy buy from guys who don't have any post history. I did not intend for you to take offence to it, but a lurker ...if I am not mistaken is a technical term used for a person with no posts, not a term I use in a negative sense.
I bet in your shop you much prefer to deal with a customer with history, than a guy fresh off the street.
My apologies if I offended you.
That is why I posted here in the 914 world rather than Pelican as I know a few of the sordid individuals here, and they know of me. It is like a big ole family in here .... and sometimes we step on each others toes in the process.
Peace to you!
[/quote]
Well Pete I have had a few sordid replys from some of those individual;s and I do my homework to make sure that they are real and if they are not I just ignore their posts.
If you have done the same you would have found out from my personal info on here that I am a real and verifyable business and have been working with Porsche clients for a long time and run a very respectable and honest business.
Here is a link to my Pelican parts profile that shows 3 pages of items that I have sold an purchased on that site. http://forums.pelicanparts.com/search.php?searchid=16928055.
That being said I accept your apology.
Brian Blake (owner operator of Brians Machine Service located in South WIndsor Ct. An independant auto repair and specialty manufacturing business doing business for the better part of half a century.)
[/quote]
effectively asking people what they have is asking people who lurk what they have.
so much salty going around today.
I have a 73.5 2.4 T motor in my /6 conversion. It's for sure a 7R - its a factory replacement motor that's been freshened up but not really run yet.
I would rather buy from a lurker than a gouger
Those are 2.7 cases.
The 2.4 7r case is a half year only case that came in all 73.5Ts and some later 73Es and Ss.
Very rare case, and the strongest of the mag cases.
The ones from the Ts would have been the least stressed since this engine was pretty anemic in power.
on the early s registry about 11 pages back is another guy selling six or seven cases. Several late T and E. might be a 7R in there.
Sorry no link
http://www.914world.com/bbs2/index.php?showtopic=322220
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)