Come on check your stash...
I need two (2) complete sets...a tad better than these would suffice.
PM w $$$
Thanks,
Oscar
12/8 Update: Bought them from 914Rubber.
Thank you all...
Oscar,
There are several vendors who sell new repro sets of those, so if no joy on here then IIRC Sierra Madre, AA, Eklers/Automation, & maybe 914Rubber, Stoddards &/or Einmalig in Huntington Bch may have some or nice used ones, etc., etc.
There are also some vendors both here & in Europe who sell complete sets of repro visors (with or without the pass. mirror/flap depending on MY 914) with the repro clip set included too. In addition to the above selling the clip sets, a few others advertise on here, evil-bay, etc. Most of those are correct heat-seamed with very close but not exact vinyl leatherette material, & with the driver-side map/reg card pocket & mirror/flap. So no need to use the prior types of non-original sewn, plain (no pocket nor mirror/flap), or wrong vinyl.
PS - I got my complete set in late 2016 or early 2017, before widely available, so I know that they're almost as good as unobtainium NOS - as if anyone can find those - fo a CW or nice drive resto.
Tom
///////
914rubber has them:
http://shop.914rubber.com/914-Visor-clip-set-left-right-and-center-914VCS.htm?categoryId=-1
Thanks...914Rubber may get this order if I can't find these.
My self-imposed budget is $75/set...wishful thinking perhaps
Oscar
Try Retro Automotive in NH. They have a lot of misc small parts and usually clean them up nicely.
Got mine from 914rubber. Easy.
If you are replacing the ones pictured, I would be interested at the right price.
Thanks,
John
Oscar, I have a box full at CAMP.
I can look Friday and send pic if needed.
Craig at CAMP
I would also need a set of these, for a 1975. (On mine for some reason the parts that are metal in the picture above are black plastic... is this how the original was?)
Oscar,
I can get you a set. We are staging these up for a Group buy.
My pins are stainless so they will never rust.
$49 a set of all 3 shipped domestic.
PM me if you want a set.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)