Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Fuel pump connector and small harness

Posted by: Jett Dec 20 2017, 11:06 AM

Hello, there is one piece of the wiring harness that is missing the last few inches and connector for the stock fuel pump... the harness ends with two connectors but nothing else. I assume I’m missing the last leg to the fuel pump?

Does anyone have the connector ?

Thanks!

Posted by: The Cabinetmaker Dec 20 2017, 11:43 AM

Depends on what pump you have.

Posted by: Jett Dec 20 2017, 12:25 PM

Sorry. I have the stock three port 73 fuel pump.

QUOTE(The Cabinetmaker @ Dec 20 2017, 09:43 AM) *

Depends on what pump you have.


Posted by: euro911 Dec 20 2017, 12:35 PM

Maybe Garold Schaffer (or someone else) has something from a parted-out car? ... otherwise, there's Jeff Bowlsby confused24.gif

Posted by: 914Sixer Dec 20 2017, 01:44 PM

I have the connector, no wires. Yours for free.



Attached image(s)
Attached Image Attached Image

Posted by: Jett Dec 21 2017, 12:53 AM

Thanks Mark!

Is there anything you need?

QUOTE(914Sixer @ Dec 20 2017, 11:44 AM) *

I have the connector, no wires. Yours for free.


Posted by: JamesM Dec 21 2017, 02:40 AM

https://reproparts.wazala.com/products/?page=2


Posted by: 914Sixer Dec 21 2017, 08:10 AM

Wow, repro parts that you can rebuild your engine wire harness and even the elusive 12 pin plug. Plug on the way to Darren.

Posted by: Jett Dec 26 2017, 01:28 PM

Thanks Mark. The part is soaking in bleach (along with the gas line holders) and looking good smile.gif! Happy holidays!

JamesH, thanks for the link.

Posted by: 914werke Dec 26 2017, 03:46 PM

is that 53.80 pounds sterling or Euro?

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)