Printable Version of Topic

Posted by: toolguy Jan 19 2018, 03:48 PM

This is a complete 911 SC/Carrera front suspension. . Has 3 1/2 inch A type calipers. Complete, nuts, bolts, the whole works. Everything new or fresh restored as pictured except the used Koni's. Just removed from an undriven restored car. Clean, restored with fresh powder paint and plating. It has new Lemforder Ball Joints. All new wheel bearings and seals with new Porsche brake pad kits. Includes wheel bearing nuts and washer and dust covers. Rotors were turned. Both calipers rebuilt using real ATE kits, with new hard and ATE soft brake lines included.
Has OE Porsche factory rubber A arm bushings installed in mounts already pressed on.
Struts have new wedge bolts, and strut cartridge nuts. Aluminum cross member with 20 mm sway bar, mounts and bushings. Has 19 mm Porsche torsion bars with caps and adjusters.

Only thing you need to provide is the 4 front A arm bolts and the 2 cross-member mount bolts. . they are the same as on a 914-4. And brake fluid. .
local pickup San Diego

If you want this shipped, I'll crate it for $100 on a pallet in a custom wooden box and you arrange and pay for shipping.

2-4-18 8PM Pending Pickup


Attached image(s)

Posted by: mepstein Jan 19 2018, 04:04 PM

That's a very good deal. Its amazing how much time it takes to make the parts look nice and all the little stuff really adds up.

Posted by: Mblizzard Jan 19 2018, 04:32 PM

Wow! Would love to drive that under my car. Too many other projects.

Posted by: JOEPROPER Jan 19 2018, 05:06 PM

Interested, but can't pick up in San Diego...

Posted by: sixaddict Jan 19 2018, 05:31 PM

I don't even need it and I want to buy it !

Posted by: Lucky9146 Jan 20 2018, 07:47 PM

I know toolguy personally and everything he does is meticulous and thorough. All that came off his concours winning 914 with best of show just this past Sept in San Diego. Took off because he wanted to return the car to completely original.

Posted by: toolguy Feb 4 2018, 03:34 PM

Bump.



2-4-18 8PM Pending Pickup

Posted by: JOEPROPER Feb 4 2018, 04:40 PM

I'm going to get a shipping quote tomorrow. I'm interested.

Posted by: burton73 Feb 4 2018, 08:18 PM

PM sent.

Bob B Inglewood, CA

Posted by: burton73 Feb 4 2018, 10:19 PM

PayPal sent. Thanks,

Bob

Posted by: Marty Yeoman Feb 5 2018, 09:56 AM

Am I missing something. What was the price on this?

Posted by: sholman5 Feb 5 2018, 03:55 PM

It was sold, so he removed the price. $2200.

Posted by: Larmo63 Feb 6 2018, 09:44 PM

That was a smoking deal. You could NOT put this together for that money.

Well bought!!!!