Printable Version of Topic

Posted by: Lucky9146 Jan 25 2018, 05:40 PM

Show me what you got.

Just discovered today I need one of these!
Project car came without one and I was none the wiser.
Thanks

Posted by: Tom_T Jan 25 2018, 06:27 PM

It's usually called the Steering Rack Cover (not skid plate), so you'll have better luck if you drop skid plate in your title & text.

Check with Bruce Stone/bdstone who's close to you (Riverside), or Rich Bontempi at HPH in Redwood City - both of whom have large stashes of parts.

Good Luck!
Tom
///////

Posted by: Fosterjoejr Jan 25 2018, 06:30 PM

PM Sent.

Thanks,
Joe

Posted by: bdstone914 Jan 25 2018, 06:39 PM

I have one that has been sand blasted clean, straightened and ready for paint. I can get it powder coated if needed. I also have several dirty ones with average amount of dents. All serviceable.
Bruce

Posted by: Lucky9146 Jan 25 2018, 08:36 PM

Thanks Bruce
Sending PM

Posted by: Larmo63 Jan 26 2018, 07:49 PM

The 911 version that I have on my car is much beefier.

Much heavier too.

Posted by: Lucky9146 Jan 27 2018, 10:06 AM

Is that a straight bolt in! I know you are at C&C right now so let me know later.
Hope you enjoyed the long drive from your house to there.

Posted by: Larmo63 Jan 27 2018, 04:41 PM

Yes. It bolts right up.