Seeking a SINGLE HE for a repair.
Either side. Condition of boxes unimportant.
LMK what you have.
Would consider 1.8L but then would require pair.
I will have Pie of SS HE's for a 1.8L shortly; replacing the current setup.Will post a classified with pictures next week.......
Bruce perhaps you can confirm.
I know the that mount ends on the OE 1.7L HE are cast pieces welded to the tubes.
I believe that the 1.8L are the same?
The mount ends for the 2.0L are not.
Rich, I have a driver side 2.0L stock HE here. It needs cleaned up a bit, but the price will be fairly cheeeeeeeeeeep.
I'll dig it out & shoot some pix ...
Here ya go:
Mark. Done & done.
Thank you
OK, glad to hear it'll suit your needs.
I'll look for some cardboard to box it up this week.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)