Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ SOLD - FS: Euromeister Wheels - Fuch Style 16x7
Posted by: mmascari Feb 9 2018, 06:32 PM
SOLD
I am selling 2- Euromeister 16x7 wheels. I purchased these to test fit but do not fit my Boxster calipers. They rub the caliper on the inside. Anyway, the tires will be removed and the wheels shipped in the original boxes. Brand new never used. Only installed tires to test fit. $300 plus buyer pays shipping. Thanks.
Attached thumbnail(s)
Posted by: 914Sixer Feb 11 2018, 08:49 AM
Good deal !
Posted by: Mitox Feb 12 2018, 06:25 PM
I have the same wheels for the front of my 914 GT project. I haven't mounted them yet, and was thinking about using the Boxster brakes also. Were your problems with non-S calipers or S calipers?
I assume it was Non-S, but want to be sure.
Thanks
Posted by: mmascari Feb 13 2018, 06:58 PM
I have the same wheels for the front of my 914 GT project. I haven't mounted them yet, and was thinking about using the Boxster brakes also. Were your problems with non-S calipers or S calipers?
I assume it was Non-S, but want to be sure.
Thanks
The problem was in the rear. I have a stock bodied car. I thought maybe they could squeeze in there but when I went to mount the wheel it hit the caliper on the inside. I could use a small spacer but then the tire would stick out even further not allowing the tire to fit on the outside. I have non-S Boxster calipers on all four corners. Unfortunately the only wheel that I think will fit with my calipers/stock body is the Boxster 16" wheel that I have on the car now. I guess I will have to do flares some day.
Posted by: Larmo63 Feb 13 2018, 07:38 PM
Wow, this does seem like a great deal....
GLWTS
Posted by: Mitox Feb 13 2018, 11:13 PM
I have the same wheels for the front of my 914 GT project. I haven't mounted them yet, and was thinking about using the Boxster brakes also. Were your problems with non-S calipers or S calipers?
I assume it was Non-S, but want to be sure.
Thanks
The problem was in the rear. I have a stock bodied car. I thought maybe they could squeeze in there but when I went to mount the wheel it hit the caliper on the inside. I could use a small spacer but then the tire would stick out even further not allowing the tire to fit on the outside. I have non-S Boxster calipers on all four corners. Unfortunately the only wheel that I think will fit with my calipers/stock body is the Boxster 16" wheel that I have on the car now. I guess I will have to do flares some day.
Thanks for the feedback. I'll need to figure out what to do for brakes soon.
Posted by: Beach914 Feb 14 2018, 08:58 AM
I'm interested and can a UPS acct # to ship down to Orange, Ca. What are the box sizes and weight so I can estimate the ground shipping?
thx
Posted by: burton73 Feb 14 2018, 12:14 PM
I have the same wheels for the front of my 914 GT project. I haven't mounted them yet, and was thinking about using the Boxster brakes also. Were your problems with non-S calipers or S calipers?
I assume it was Non-S, but want to be sure.
Thanks
The problem was in the rear. I have a stock bodied car. I thought maybe they could squeeze in there but when I went to mount the wheel it hit the caliper on the inside. I could use a small spacer but then the tire would stick out even further not allowing the tire to fit on the outside. I have non-S Boxster calipers on all four corners. Unfortunately the only wheel that I think will fit with my calipers/stock body is the Boxster 16" wheel that I have on the car now. I guess I will have to do flares some day.
Thanks for the feedback. I'll need to figure out what to do for brakes soon.
On the Boxster brakes
Hi Robert,
Any Porsche 15 or 16" alloy wheel, 7" or wider will fit over the boxster caliper. My guess is the guy bought the "cost effective" cast Fuchs copies which have a completely different ID.
You're golden and the best of luck with the project!
Rich
Bob B
Posted by: mmascari Feb 14 2018, 12:59 PM
I'm interested and can a UPS acct # to ship down to Orange, Ca. What are the box sizes and weight so I can estimate the ground shipping?
thx
Sorry they just sold.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)