Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: Auxiliary Air Regulator -Part# 022906045

Posted by: Jett Feb 23 2018, 11:48 PM

After a three year restoration, our 1973 2.0 had its first tune today . That said, the last remaining problem is that the air bypass valve for the high idle when cold is not shutting off. So the idle sticks high. Its getting power so we think it has to be the valve?

Does anyone have an auxiliary air regulator for sale?

Thanks

Posted by: 914Sixer Feb 24 2018, 07:58 AM

Might try shooting some PB Blaster and letting it set for a while. May free it up.

Posted by: mepstein Feb 24 2018, 08:19 AM

I have this one. PM me your address. I'll send it out. If you are happy with it and it works, you can send me $50.

Attached image(s)

Posted by: JOEPROPER Feb 24 2018, 08:38 AM

QUOTE(mepstein @ Feb 24 2018, 09:19 AM)

I have this one. PM me your address. I'll send it out. If you are happy with it and it works, you can send me $50.

Mark, do you have the elbow that goes on the other end?

Posted by: mepstein Feb 24 2018, 09:12 AM

QUOTE(JOEPROPER @ Feb 24 2018, 09:38 AM)

QUOTE(mepstein @ Feb 24 2018, 09:19 AM)

I have this one. PM me your address. I'll send it out. If you are happy with it and it works, you can send me $50.

Mark, do you have the elbow that goes on the other end?

Doesn't the other end get a straight piece of hose directly to the manifold. I don't remember.....

Posted by: JOEPROPER Feb 24 2018, 09:50 AM

QUOTE(mepstein @ Feb 24 2018, 10:12 AM)

QUOTE(JOEPROPER @ Feb 24 2018, 09:38 AM)

QUOTE(mepstein @ Feb 24 2018, 09:19 AM)

I have this one. PM me your address. I'll send it out. If you are happy with it and it works, you can send me $50.

Mark, do you have the elbow that goes on the other end?

Doesn't the other end get a straight piece of hose directly to the manifold. I don't remember.....

I think there is an elbow at the top port. I've seen pictures of it, but this is a project that I didn't take apart.

Posted by: Jett Feb 24 2018, 10:49 AM

PM sent, thanks!

QUOTE(mepstein @ Feb 24 2018, 06:19 AM)

I have this one. PM me your address. I'll send it out. If you are happy with it and it works, you can send me $50.

Posted by: MikeInMunich Feb 26 2018, 11:17 AM

QUOTE(JOEPROPER @ Feb 24 2018, 07:50 AM)

QUOTE(mepstein @ Feb 24 2018, 10:12 AM)

QUOTE(JOEPROPER @ Feb 24 2018, 09:38 AM)

QUOTE(mepstein @ Feb 24 2018, 09:19 AM)

I have this one. PM me your address. I'll send it out. If you are happy with it and it works, you can send me $50.

Mark, do you have the elbow that goes on the other end?

Doesn't the other end get a straight piece of hose directly to the manifold. I don't remember.....

I think there is an elbow at the top port. I've seen pictures of it, but this is a project that I didn't take apart.

That "elbow" is rubber and isn't typically with an AAR valve. Perhaps it's connected to the intake on the engine? If you don't have it there it may be on your own AAR which is apparently defective(?). Otherwise, it's missing. Good luck finding it!

Posted by: Mikey914 Feb 27 2018, 10:29 PM

Goes to the manifold.

We made the elbow

Attached thumbnail(s)