Hey everyone,
I was cleaning out my dad's garage and found some axles and CV's and a distributor off his 914-6 (sold the car to a member on here about 10 years ago).
Any idea what their value and who might want/need them? We are located in Carlsbad, CA.
Thanks for any help.
Attached image(s)
I’m interested in the CVs if you confirm they are 914-6 spline count vs 914-4
I counted, an I think I can count 26 splines... let me know if that helps. I am not a Porsche guy so you would have to tell me what they are off of, but it should be 914-6.
Interesting info on the box. They show to be VW bus CV's. Hence the 211 number BUT the spline count should be 33. They do have the 6 bolt holes and NOT 4 holes and two pins as the -6 should have.
Measure the CV's and see if they are 100mm.
Thanks for helping me solve this mystery. The CV's may not be Porsche afterall, they may be from a Vanagon we had...that makes sense. I believe the axles are off the 914 though... how many splines should a 914-6 have?
I will measure the CV's.
914-6 CV's will be 93 mm just like the -4. Can't find reference on -6 spline count. So the axles most likely are -6.
25 splines per below.
Is the distributor also for sale? Does it have a make/model number on it? Looks like a 6 cylinder...
- Tony
Hey Tony,
Yes the distributor is for sale. It's this distributor (I found this one on ebay)
https://www.ebay.com/itm/Marelli-Distributor-S112-BX-911T-and-914-6-/132532952997
Here are some pics...
I'm interested in the Vanagon CV joints. Shoot me a PM with your asking $
Thanks ...
Your CVs are definitely Vanagon 1968-91 by part number; these are different from 914-6
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)