Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ Wtb/ Outer trailing arm mount late 72.
Posted by: sholman5 Mar 28 2018, 04:26 PM
Would like to buy an outer trailing arm mount passenger side.
Mine is rusted out. Inner console is in good condition.
Thnx Chris
Posted by: bdstone914 Mar 28 2018, 06:24 PM
I may have one that one can be cut from a parts car. Until you cut them out and inspect inside you do not know the true condition. I would only sell the complete inner and outer trailing arm mount. I would want $100 for it as it is a lot of cutting on that part Let em know.
Posted by: mepstein Mar 28 2018, 06:26 PM
QUOTE(bdstone914 @ Mar 28 2018, 08:24 PM) 
I may have one that one can be cut from a parts car. Until you cut them out and inspect inside you do not know the true condition. I would only sell the complete inner and outer trailing arm mount. I would want $100 for it as it is a lot of cutting on that part Let em know.
$100 is a gift. It’s a lot of work.
Posted by: Garold Shaffer Mar 28 2018, 06:36 PM
QUOTE(mepstein @ Mar 28 2018, 07:26 PM)
QUOTE(bdstone914 @ Mar 28 2018, 08:24 PM)
I may have one that one can be cut from a parts car. Until you cut them out and inspect inside you do not know the true condition. I would only sell the complete inner and outer trailing arm mount. I would want $100 for it as it is a lot of cutting on that part Let em know.
$100 is a gift. It’s a lot of work.
Posted by: sholman5 Mar 28 2018, 06:39 PM
QUOTE(bdstone914 @ Mar 28 2018, 08:24 PM)
I may have one that one can be cut from a parts car. Until you cut them out and inspect inside you do not know the true condition. I would only sell the complete inner and outer trailing arm mount. I would want $100 for it as it is a lot of cutting on that part Let em know.
Th@nk$
Chris
Posted by: bdstone914 Mar 28 2018, 09:11 PM
QUOTE(sholman5 @ Mar 28 2018, 05:39 PM)
QUOTE(bdstone914 @ Mar 28 2018, 08:24 PM)
I may have one that one can be cut from a parts car. Until you cut them out and inspect inside you do not know the true condition. I would only sell the complete inner and outer trailing arm mount. I would want $100 for it as it is a lot of cutting on that part Let em know.
Th@nk$
Chris
Wait till I cut it out and know it is good. You need to cut off the top of the long or go in with a note scope to check inside. Can have more rust inside than outside if the drain plugs up. I have two possible cars with suspension consoles.
Posted by: mbseto Mar 29 2018, 07:31 AM
bdstone, if it turns out you have two good ones, please PM me!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)