I have tried to buy a 2.0L crankshaft for a backup engine for the racecar.
My first attempt resulted in me receiving a 1.8L crank instead of a 2.0L so I am still looking.
Does anyone have a good 2.0L stock crank?
It would be preferred to be good as new (STD-STD bearings) but I would be willing to cut the crank down one step.
Let me know
I have one that came out of my 912E. Running condition when I bought the car but the rings got stuck and I ended up taking it all apart to build a 2270.
I have the box that the new crank came in so I could ship in that - not sure what the cost to ship would be (its heavy as you know). I can take some pictures tonight to send to you if you are interested. $150 + shipping and I would be willing to throw in the rods.
I have to remove the distributor and cam gear before I can send it though.
Brook
I have a number of 2.0L cranks, all from original 2.0914 motors, all inspected, I build stroker motors (78mm) so dont use the 71's.
Stuart
I emailed you pictures of my crankshaft. Let me know if you are still interested.
Brook
PM sent.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)