For Sale: Used Patrick Motorsports Fuel Cell.
$650.00 or best offer
Purchased and installed by Otto's March 2006.
Bladder is original. The bladder holds 10 gallons.
I was told by fuel safe the bladder replacement is only available from Patrick Motorsports. I was told its around $1k for a replacement. I would call to make sure.
Here is a link to the PMS page for more information.
http://www.patrickmotorsports.com/part/porsche-914-fuel-cell-tank-10-gallon/
Can you pull and offer pics of the bladder/condition? SCCA no longer mandates the 5-year replacement ("Fuel cells do not time out and have no expiration date.") In reality, most orgs don't actually enforce it because it's such a PITA to pull bladders to verify the dates. It's probably a case of "looks good, looks safe, it's your ass go have fun."
More importantly, however, I'm not seeing on Patrick's web site where this cell carries the required FIA or SFI certification. SCCA's regs:
"All safety fuel bladders shall be constructed and certified in accordance with the FIA FT-3 or higher (FT-3.5, FT- 5, etc.) or SFI 28.3 specifications. Fuel cells do not time out and have no expiration date. Alternatively, safety fuel cells shall be constructed in accordance with FIA FT-3 or higher or SFI 28.3 specifications and tested to those requirements by an independent facility as witnessed and certified by a Professional Engineer."
Were I doing things all over again, I'd go this direction instead of a cell mounted up front in the trunk area. SCCA actually allows use of the stock tank because "stock fuel tank is located between the axle center lines and within the main chassis structure".
If you an demonstrate that the bladder is actually in good shape, you may have a larger customer base for it.
PM sent
As a data point -
Not sure if this bladder uses the same material or not but I just pulled and inspected the bladder and foam in my vintage race car. The black rubber bladder and purple foam were pristine. This is an ATL cell......built in 1985.
sold and shipped to Larry
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)