Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: Bunch of stock stuff.

Posted by: Mr.Nobody Jun 9 2018, 11:41 AM

Had to clean out the garage. Got a number of things I'm looking to clear out.

PayPal and shipping costs.

All items located in San Diego, CA.

Thanks for looking. beerchug.gif


Complete 1.7 fuel injection system. Ran alright when I took it off. $350+ shipping
Front calipers and 17mm master cylinder $50+ shipping SOLD
Rear sway bar with end links and bushings. Need the bolts with the ball on the end. $200 + shipping pending
Rear chassis reinforcement kit. $120 + shipping pending
Decent OEM steering wheel. $250 + shipping pending
OEM weather stripping. Part number 914-531-821-10 sold
Headlight buckets with motors. $100 + shipping SOLD
Front bra, needs minor stitch repair. $50 + shipping
Set of four wheels, just take them (or is that against the rules to? relax, I'm just kidding)


IPB Image
IPB Image
IPB Image
IPB Image
IPB Image
IPB Image
IPB Image
IPB Image
IPB Image
IPB Image

Posted by: mepstein Jun 9 2018, 12:02 PM

I’d like to buy the steering wheel and weather stripping. Thanks, mark

Posted by: orthobiz Jun 9 2018, 12:30 PM

Also steering wheel if mepstein doesn't want it.

Paul

Posted by: Driver174 Jun 9 2018, 12:31 PM

I’m interested in the front calipers; how much shipped to Vegas 89123?
Thanks,
Jim

Posted by: rdauenhauer Jun 9 2018, 12:33 PM

confused24.gif Prices? Rules?

Posted by: Garold Shaffer Jun 9 2018, 03:51 PM

How much for the rear bar?

Posted by: Mr.Nobody Jun 9 2018, 10:40 PM

Sorry for the delay. I've got family that just came into town for an overnighter. I'll be back to answer everyone tomorrow.

Thanks for understanding.

Posted by: The Cabinetmaker Jun 10 2018, 07:11 AM

QUOTE(rdauenhauer @ Jun 9 2018, 01:33 PM) *

confused24.gif Prices? Rules?

I agree. Please read rule #2 above.

Posted by: Tdskip Jun 10 2018, 07:22 AM

Dibs on rear chassis kit pending price.

Can pick up this week.

Posted by: Mikey914 Jun 10 2018, 02:53 PM

Put me in line for the 1.7 stuff. Pending pricing.

Posted by: Mr.Nobody Jun 10 2018, 03:49 PM

Sorry guys. I was just trying to unload some stuff that I didn't need and as you all know one man's trash is another man's treasure, especially in 40+ year old cars. I hadn't spent the time to research all the prices as I'll be honest, I don't have much free time. While yes, under the second bullet point up top of the classifieds it says "please put a price in your ad," it does not say prices must be posted and I figured we could all be adults and go off of my original post, second paragraph "Reasonable offers accepted plus all PayPal and shipping costs." If that's to much I'll try and get prices for everyone.

In the meantime, I am working through my pm's. Sorry for any confusion my post may have caused. I'm not trying to be difficult, just trying to move some stuff that I don't need as I know someone out there needs something.

Thanks for everyone looking.

Posted by: The Cabinetmaker Jun 10 2018, 04:00 PM

So, the rest of us follow the rules, but your exempt from them? Make an offer, that means you will take the "highest bidder"Yes, it takes time to research and put a fair price, but we do it anyway. I think the section is called rules, not suggestions. If you don't want to play by those rules, there is nothing i can do about it. Good luck with your auction.

Posted by: Mr.Nobody Jun 10 2018, 04:04 PM

QUOTE(The Cabinetmaker @ Jun 10 2018, 03:00 PM) *

So, the rest of us follow the rules, but your exempt from them? Make an offer, that means you will take the "highest bidder"Yes, it takes time to research and put a fair price, but we do it anyway. I think the section is called rules, not suggestions. If you don't want to play by those rules, there is nothing i can do about it. Good luck with your auction.



Sorry you couldn't be appeased

I'm not trying to auction. Just giving people first come first serve at a chance to make a reasonable offer like adults, if the offer they make is reasonable, then they can have it. I'm not starting bidding wars here. Sorry you seem to look at it in another light.

In simpler words, well... bye.

Posted by: Beach914 Jun 10 2018, 05:36 PM

Where are the moderators? All of us that have posted and sold items over the years comply because that's what it is asked of us to be a member of this great community ....and then you come along and think you're special. Wow.

Posted by: Jeff Bowlsby Jun 10 2018, 05:55 PM

He’s got a point in that it does say “guidelines” below where it says rules. Moderators may want to clear up the mixed message.

Posted by: rdauenhauer Jun 10 2018, 06:24 PM

Speaking of moderators where is Shea? Is he the keeper of the classifieds?
Just assuming since its his fingers all over the Stickies.

Posted by: rhodyguy Jun 10 2018, 06:39 PM

Back in town. Hubba hubba. No need for Eric on this one. I might be way off base on this. "Please put a price IN YOUR AD...". I believe this is a AD. I THINK you are be asked to include a price. I dunno. Figure out what you WANT for your stuff. Not what it MIGHT be worth. Like $50 takes it all. I'm pretty sure it MIGHT be worth THAT much. This is not an auction site. Try eBay. You do know you're responsible for shipping quotes, right? Very time consuming.

Mark, I have some 1.7 fi gear. By perusing the classified histories, I think I know what the parts might be worth. Not MY ad so the prices are super top secret.

Posted by: Mr.Nobody Jun 10 2018, 06:56 PM

Lot of ruffled feathers in here. That wasn't my intention.

Relax fellas. It's just a web forum. I guess I'll start looking up prices.

Posted by: The Cabinetmaker Jun 10 2018, 07:24 PM

This is not just a forum. This is community. A community I'm proud to be a part of. Thank you for posting prices.

Posted by: gcrotvik Jun 10 2018, 07:56 PM

QUOTE(The Cabinetmaker @ Jun 10 2018, 06:24 PM) *

This is not just a forum. This is community. A community I'm proud to be a part of. Thank you for posting prices.


Hey Curt, you need to step back off the ledge here. Not sure what got your knickers in a bunch but Andy seems like a great guy. I PMed him about a part and offered a price. He countered with a reasonable price and I accepted. Not sure why you are all worked up. Why not give the guy a break.

Posted by: The Cabinetmaker Jun 10 2018, 08:05 PM

Hmm, not on any ledge. I asked the guy politely to post prices. He declined. After some other members also commented, he said he would. I thanked him. It's over. Move on

Posted by: Mikey914 Jun 10 2018, 11:02 PM

I'm out. I was just looking for some back up parts, don't really need these. It does help when you post prices, as to if you have a buyer. At $1 I'm in, not saying your price is not fair, but I really don't need these and was just acquiring a back up.

Posted by: Ed_Turbo Jun 11 2018, 12:10 AM

Do you have a pic of the bra where the tear is? Is it stinky? Do you have a 3/4” braided hose in that box? PM me.


-Big Ed

Posted by: Mr.Nobody Jun 12 2018, 06:24 PM

All PM's returned to and quotes sent. Thanks everyone

Posted by: second wind Jun 12 2018, 07:41 PM

QUOTE(Mr.Nobody @ Jun 12 2018, 05:24 PM) *

All PM's returned to and quotes sent. Thanks everyone


Dibs on visors please....pm me a price with shipping please. Thank you,
gg

Posted by: Mr.Nobody Jun 13 2018, 07:28 AM

QUOTE(second wind @ Jun 12 2018, 06:41 PM) *

QUOTE(Mr.Nobody @ Jun 12 2018, 05:24 PM) *

All PM's returned to and quotes sent. Thanks everyone


Dibs on visors please....pm me a price with shipping please. Thank you,
gg



Pm sent.

Posted by: ClayPerrine Jun 13 2018, 11:15 AM

As an admin, I have to point out that Kurt was right.

"Please put a price in your ad and state how you would like payment."

Please put prices in the ads when you first post them.

THank You.

Posted by: ValcoOscar Jun 13 2018, 11:29 AM

I will take BRA...please PM shipping to 90255

Hey Ed Turbo...if you want it, I'll pass.

It would be nice to use when I haul my car on P hauler

Thanks

Oscar

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)