Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ WTB: 914 4 Cyl Chassis Motor Mount

Posted by: carr914 Jun 13 2018, 09:12 AM

If anyone did a 6 Conversion and cut their 4 cylinder mounts off, a friend of mine needs a Passenger side

TC

Posted by: KevinW Jun 13 2018, 11:11 AM

Do you have a picture of what you need?

Posted by: Travis Neff Jun 13 2018, 01:14 PM

Are the driver and passenger sides different, or same? I may be able to get my driver side one off in one piece.

Posted by: rdauenhauer Jun 13 2018, 01:37 PM

QUOTE(Travis Neff @ Jun 13 2018, 12:14 PM) *
Are the driver and passenger sides different, or same? I may be able to get my driver side one off in one piece.

Yes

Posted by: Travis Neff Jun 13 2018, 01:44 PM

OK, I will see if I can get that sucker off today in one piece. Your's for shipping if I can.

Posted by: rdauenhauer Jun 13 2018, 03:33 PM

Yes, its different

Posted by: Travis Neff Jun 13 2018, 03:42 PM

HA! I was just coming back in from drilling out some spot welds on the drivers side. And yes it is different from side to side. Sorry TC!

Posted by: carr914 Jun 15 2018, 08:15 PM

Here is a close up - the chassis "Ear" mount.

Apparently the Kennedy LS Conversion uses the Ears for their Engine Mount

Attached Image

Posted by: bdstone914 Jun 16 2018, 07:47 AM

QUOTE(carr914 @ Jun 13 2018, 08:12 AM) *

If anyone did a 6 Conversion and cut their 4 cylinder mounts off, a friend of mine needs a Passenger side

TC


I have a couple of parts cars that should have passenger side engine mounts still on the car. Can not promise when i can get to cutting one out. I would want $75 to cover the time to cut one out. If you do not find one more readily available let me know and I will confirm the ones I have are usable.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)