Posted by: JOEPROPER Jun 18 2018, 03:29 PM
WTB
So, I don't know if this is a reasonable request but, I'm looking for a used section of engine firewall where the clutch tube cables, fuel lines come thru. I know that Restoration Design has a firewall on their website, but was hoping to find a used one that was ok. Thanks in advance.
Posted by: sholman5 Jun 18 2018, 06:45 PM
Early or late? There is a difference. 70-72 or 73 and up
Posted by: bdstone914 Jun 19 2018, 06:37 AM
QUOTE(JOEPROPER @ Jun 19 2018, 04:32 AM)
Late. 1975.
I have a 73 parts car that I can cut it from. Do you have the cracked clutch tube problem on the firewall ?
Bruce
Posted by: JOEPROPER Jun 19 2018, 08:01 AM
QUOTE(bdstone914 @ Jun 19 2018, 08:37 AM)
QUOTE(JOEPROPER @ Jun 19 2018, 04:32 AM)
Late. 1975.
I have a 73 parts car that I can cut it from. Do you have the cracked clutch tube problem on the firewall ?
Bruce
No. Clutch tube is not cracked. Let me know what you need for it. Thanks.
Posted by: Front yard mechanic Jun 19 2018, 10:38 AM
Do you need the whole firewall or just the tube section I have just the tube section portion with the tubes cut on the inside its about 2 lbs
Posted by: Front yard mechanic Jun 19 2018, 12:05 PM
QUOTE(Front yard mechanic @ Jun 19 2018, 08:38 AM)
Do you need the whole firewall or just the tube section I have just the tube section portion with the tubes cut on the inside its about 2 lbs
Posted by: JOEPROPER Jun 19 2018, 03:46 PM
FrontYard, What year is that from?
Posted by: Front yard mechanic Jun 20 2018, 06:34 AM
Not real sure it came with my 76 shell on the replacement floor I'm thinking 73
Posted by: JOEPROPER Feb 18 2019, 03:39 PM
Still looking. Or i should say, looking again. It's the section shown above, but late model (1975)
Posted by: Fosterjoejr Feb 19 2019, 05:24 PM
QUOTE(JOEPROPER @ Feb 18 2019, 01:39 PM)
Still looking. Or i should say, looking again. It's the section shown above, but late model (1975)
PM sent.
Posted by: JOEPROPER Mar 14 2019, 11:05 AM
Final bump before I go the Restoration Design route...
Posted by: dlee6204 Mar 14 2019, 05:47 PM
QUOTE(JOEPROPER @ Feb 18 2019, 04:39 PM)
Still looking. Or i should say, looking again. It's the section shown above, but late model (1975)
The section above is late model and what you are looking for. 73 and up would work.
Posted by: JOEPROPER Mar 15 2019, 08:28 AM
QUOTE(dlee6204 @ Mar 14 2019, 06:47 PM)
QUOTE(JOEPROPER @ Feb 18 2019, 04:39 PM)
Still looking. Or i should say, looking again. It's the section shown above, but late model (1975)
The section above is late model and what you are looking for. 73 and up would work.
I think you're right... Mine must have been modified at some time making it look different.
PM sent to Frontyard
@Frontyard