Hi,
Looking for a decent set of Pedrini wheels for a ‘73 914. Must have part number ending in 01. Please PM me if you have a set you’re selling.
Thanks!
Alex
Still looking for a late set of Pedrinis!
I had difficulty finding late ones. But you can take the early ones to the machine shop and have the centers bored to make them hub centric. Cost me about $30 a wheel.
Took the shop a late front disk and they set it up from there. Really straight forward.
Will all of them work on a 1970?
Bob B
I may have a set that i'm not going to use. i'll check.
Rears are no problem. The 73-76 centering hubs require large bore.
Still looking for a set!
If I can remember I'll look at the set I have in my shed when I get home tonight. I'm going to a business function after work at a brewery so I might need a reminder PM.
Weekend bump
I have one that was a spare so I am not sure of the quality.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)