Looking for the left / right TOP cooling tin pieces (the big pieces) from a 2.0 that are in decent shape. Would prefer to not have to modify 1.7 pieces if possible. Also, 2.0 intake runners.
Shipping in this case to zip 49508.
I’ll check when I get home from work. I think that I have an extra set of runners and maybe some tin.
Kevin
I may have a set , but I got my redone set from Bruce stone, along with all the tin top and bottom, except for a few under pieces I got from Kevin(rhodguy), even all my other heater tubes etc Bruce has everything.
Phil
I have a set of tin and the runners.
But this is Texas, so they were cut for AC.
Let me know if you are interested.
Thanks, fellas. I'll wait to see what Kevin has, and then maybe circle back to Clay and/or Phil. Darn, A/C sure sounds nice right about now, but I'm not sure I'm ready to go that route on cutting up the other body parts. What part of the tin gets modified / cut for that?
Phil, couldn't tell if you do or don't have the parts Sounds like you're not sure?
Thanks again, guys.
I have the runners https://914werke.com/shop?keywords=intake&olsPage=products%2Ffi-intake-runners
Thanks to all that replied, including Rich. Just purchased driver's side tin and intake runners from Kevin. Still looking for passenger side, although I am interested in the one you have, Clay. I'll send PM.
Still looking for passenger side tin. I'm going to pickup Clay's with the AC cutout as one day I would LIKE to do that.
For now I still need a regular, 2.0, passenger side tin.
Your tin is in transit.
Betty wanted me to say thank you for the new carpet for her car. You buying the tin paid for it.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)