Printable Version of Topic
Click here to view this topic in its original format
914World.com _ FS/WTB: 914 Parts _ WTB Relief valve piston and spring in use-able condition
Posted by: renaultc Jul 19 2018, 12:27 PM
WTB relief valve piston and spring
see attached pics for item needed. Any help on sourcing one would be appreciated. as you will see the top of the piston is scored and too deep to lap out. 
Posted by: 914Sixer Jul 19 2018, 01:56 PM
I should have one, but finding it might be the trick. I will look in the morning. 106 degrees right now.
Posted by: KevinW Jul 19 2018, 02:15 PM
I have both
Posted by: ClayPerrine Jul 19 2018, 02:27 PM
Go to Tangerine racing website and order the kit to replace it. 40+ years of use has worn the bore, and with it comes low oil pressure. Chris has created a kit to fix it. Simple installation. It too me 30 minutes, and most of that was putting the car on jack stands and letting it down.
Posted by: renaultc Jul 19 2018, 02:44 PM
I have both
Thanks Kevin, PM'd you.
Posted by: renaultc Jul 19 2018, 02:45 PM
Go to Tangerine racing website and order the kit to replace it. 40+ years of use has worn the bore, and with it comes low oil pressure. Chris has created a kit to fix it. Simple installation. It too me 30 minutes, and most of that was putting the car on jack stands and letting it down.
The bore is good, I was hoping to locate a good used one. If I can't then this is the way I'll be going. Thanks for the tip. Appreciated.
Posted by: renaultc Jul 19 2018, 02:47 PM
I should have one, but finding it might be the trick. I will look in the morning. 106 degrees right now.
Thanks Mark.
KevinW might have one for me. If he doesn't then I'll get in touch. Stay cool and drink
not even close to 106 at all in the north. something like 26C here today in Regina. city that rhymes with fun.
Posted by: 914Sixer Jul 19 2018, 07:30 PM
Didn't have one. Large one only.
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)