Printable Version of Topic

Posted by: poorsche914 Jul 21 2018, 08:47 PM

Starting to clear out some of my 914 parts stash. First up are some stainless heat exchangers.

Passenger side 1.7/1.8 SS Heat Exchanger is in very nice condition except for the mounting flange is mangled a bit. Not sure if when snugged up with a gasket it would seal or not. I seem to have seen new flanges are available... somewhere.

$200 plus shipping.











Need a 2.0 style heat exchanger? Buy the 1.7/1.8 exchanger for $200 and I will include the 2.0 exchanger - you pay to ship them both. Then, cut off the end of the 1.7/1.8 exchanger, cut off the end of the 2.0 exchanger, and then weld the 2.0 section to the good 1.7/1.8 heat exchanger section. I did this very thing to the driver side exchanger on my 914 and it has held up perfectly over the past 6 years!

Posted by: rcotten951 Aug 3 2018, 07:22 PM

QUOTE(poorsche914 @ Jul 21 2018, 07:47 PM)

Starting to clear out some of my 914 parts stash. First up are some stainless heat exchangers.

Passenger side 1.7/1.8 SS Heat Exchanger is in very nice condition except for the mounting flange is mangled a bit. Not sure if when snugged up with a gasket it would seal or not. I seem to have seen new flanges are available... somewhere.

$200 plus shipping.











Need a 2.0 style heat exchanger? Buy the 1.7/1.8 exchanger for $200 and I will include the 2.0 exchanger - you pay to ship them both. Then, cut off the end of the 1.7/1.8 exchanger, cut off the end of the 2.0 exchanger, and then weld the 2.0 section to the good 1.7/1.8 heat exchanger section. I did this very thing to the driver side exchanger on my 914 and it has held up perfectly over the past 6 years!

Posted by: poorsche914 Aug 4 2018, 06:20 PM

SOLD