Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS : Zenith 40 T I N carburetors & manifolds

Posted by: Dion Jul 23 2018, 05:52 PM

Asking $1,400
These carbs came off a 911T engine. I’m no carb expert but
I gently “cleaned” them and replaced the all the gaskets that came
in a Zenith kit. Some mods done to the manifold per previous owner
Quote:
“The ports and
lines you see are there to supply manifold vacuum for the power assisted
brakes on the VW camper in which I had the engine installed .. You can just
plug those off .. Tap and install pipe plugs or maybe a 6 or 8-MM bolt ..or
just use rubber caps...
The other plugs you see are for the emission controls those carbs originally
came with .. Their function was to keep the engine from dropping back to
dead idle ( throttle plates closing ) This created a high vacuum situation
where there was fuel being drawn into the cylinders and having no coming in
for O2 for combustion to take place .. That whole system has been removed
and the necessary passages plugged”
I removed the fuel lines and vacuum hoses as they were dry rotted. These should be ready to just bolt on and go once the appropriate adjustments made.

NO air filter or housings included
PayPal Thanks. US shipped only


Attached thumbnail(s)
Attached Image Attached Image

Posted by: Dion Jul 23 2018, 05:54 PM

Pics


Attached thumbnail(s)
Attached Image Attached Image

Posted by: Dion Jul 23 2018, 05:54 PM

Pics


Attached thumbnail(s)
Attached Image Attached Image

Posted by: Dion Jul 23 2018, 05:55 PM

Pics


Attached thumbnail(s)
Attached Image Attached Image

Posted by: Dion Jul 23 2018, 05:56 PM

Overhead


Attached thumbnail(s)
Attached Image

Posted by: forrestkhaag Jul 23 2018, 06:30 PM

Good detail in your pics / good luck with your sale / the right car and engine needs this setup

cheers

beerchug.gif icon_bump.gif

Posted by: Dion Jul 23 2018, 08:29 PM

Extra pics: old vacuum lines highlighted in yellow block since removed.


Attached image(s)
Attached Image Attached Image Attached Image

Posted by: johnhora Jul 24 2018, 08:50 AM

Dion...

Be sure to post these over on Pelican and 911 Registry sites..
Many 911 owners there that would be interested in these..
Good luck on the sale...nice carbs

Posted by: Dion Jul 24 2018, 08:58 AM

QUOTE(johnhora @ Jul 24 2018, 06:50 AM) *

Dion...

Be sure to post these over on Pelican and 911 Registry sites..
Many 911 owners there that would be interested in these..
Good luck on the sale...nice carbs


Too funny! You made that suggestion as I was doing exactly that!
Thanks! For the reminder.

Posted by: Dion Jul 31 2018, 05:24 AM

Price Reduced $1,400. smash.gif

Posted by: Dion Aug 13 2018, 07:04 AM

I will certainly entertain reasonable offers (shipping not included) smash.gif
My 914 will appreciate your contribution to its resto. beerchug.gif
Pass the word. Thanks guys. Appreciate you looking.

Posted by: Dion Aug 27 2018, 09:21 AM

Now $1,200 + S & H
Thanks for checking.

Posted by: bdstone914 Aug 28 2018, 08:04 AM

You will probably have better luck selling them on Early 911S Registry to some one who has a car on which those are correct. Not knocking the price but those type carbs were selling for $300 a few years ago. But then again people used to junk the original Solex 3 barrel carbs now 911 owners are paying up to $6000 for a set as the supply dries up.

Posted by: Dion Aug 28 2018, 05:28 PM

Bruce, I have them on the S registry & Pelican.
I was basing my price on evilbay. Most are asking this price for 1 instead of the pair. If you know anyone.....
I’m open to offers. Just had to start a price somewhere.
Thanks looking in.

Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)