Looking for a working heated rear window. I got one with the car, but it was damaged while bringing it home.
If it didn't come from the factory with one, I wouldn't bother. It's not needed here in Texas.
Will consider one from anywhere. Shipping costs are not a problem.
Thanks in advance.
Clay
Evil Bay
https://www.ebay.com/itm/1970-1976-PORSCHE-914-REAR-WINDOW-GLASS-W-DEFROST-OPTION-OEM/283032296667?fits=Make%3APorsche%7CModel%3A914&hash=item41e60a1cdb:g:PUcAAOSwjVxbNqXP:sc:UPSGround!91423!US!-1
https://www.ebay.com/itm/Porsche-914-rear-back-window-glass-w-defrost-defog-OEM-used/382524450134?hash=item59103be556:g:7esAAOSwAata~6E6
https://www.ebay.com/itm/74-Porsche-914-Rear-Window-Back-Glass-With-Defrost-Option-3856-/232720005323?_trksid=p2385738.m4383.l4275.c10
Hmm .........no ones coming to the party ?
I think I have 2 of them on the rack. Do they work ?
I can have Super In Law run continuity tests on them Thursday.
Continuity is the problem. My -4 came from Montana so it had one but the window has a few gaps from cleaning over the years.
I have a couple too that may work and need to run the continuity test. I would not buy one on Ebay when they do not state that it was tested. I would sell a good one for $100. Shipping is kind of expensive.
Bruce
Clay. Can these be repaired?
I've used this product a couple times with good success.
https://www.frostfighter.com/index.htm
Have one ...not tested as yet but car had 55K miles when it was hit. Seems you probably have located several. Let me know if you need one after the others play out.
I am interested in one that doesn't need repair. The car is down because the window is out of it.
Send me some pictures!!!
Is there an early vs late designation for rear windows? Just curious.
I don't think so. There are only two part numbers in PET. One for with heat, and one without. And the with heat is superseded to the number for the one without.
guys
thanks for your timely advices on the heated back window
as a result of some horse trading,I acquired a heated backlite recently which has the regulation ratty wires and the missing side clip
I want to repair this one as the date seems to be the same as my car's build month
Does anyone have a link to the Permatex repair kits pls ?
TIA
Dennis
Did any of you do the testing on a windows yet? I am ready to buy the first one that tests good.
I have 1 located in Northern California. $200
Attached thumbnail(s)
With fluke set to resistance the. Number varies my fluke is set to auto all depend on hard you press the wires
With fluke set to resistance the. Number varies my fluke is set to auto all depend on hard you press the wires
Attached thumbnail(s)
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)