Printable Version of Topic

Posted by: nditiz1 Aug 12 2018, 09:40 AM

SOLD

Selling an extra set of 2.0 Heat Exchangers. These are original ones off a GA 2.0 motor. Some minor cracking of the ears (2 total) as shown in pics. Nothing that will hinder them from being installed. This comes from over tightening them. Also note 1 missing and 1 degraded welded nut for the bottom sheet metal. Either weld a new nut on, us a nut on the back side of the screw (6mm) when installing, or go without.

$500
Pm for paypal details

Posted by: colingreene Aug 13 2018, 10:28 AM

wow i guess i got lucky a few weeks ago when i picked up a pair of these in maybe better shape for 500

Posted by: nditiz1 Aug 13 2018, 01:06 PM

I think you did. If you check back through the posts you will see OG ones go for 800+. I tried to be detailed when selling. I could have just posted them up without showing the minor cracks. Will the cracks prevent them from working/sealing not at all, but if someone keeps over tightening them they could. A new aftermarket set runs over a G I believe from AA.

Posted by: 914_teener Aug 14 2018, 06:51 AM

The cracks are actually a common design fault are most all of them do it over time.

It has to do the differential heating and poor welding design.

They should just be re-welded on both sides of the ear and then straightened as the heating will move the tubes slightly.

GLWS

Posted by: nditiz1 Aug 14 2018, 02:59 PM

Bump price reduction now $600 obo

Posted by: nditiz1 Aug 16 2018, 04:56 AM

Final Price Bump - take these off my hands $500

Posted by: Chris Scott Aug 16 2018, 08:53 AM

pm sent

Posted by: nditiz1 Aug 16 2018, 09:07 AM

responded