Here's a good used flex dam rubber. This attaches the same way as the 914Rubber air dam, but has the horizontal rib pattern.
SOLD! $50 plus actual shipping (can fit in a Priority Mail medium flat rate box).
thanks!
Carl
back to the top again.
How dow the rubber attaches to the fiberglass ? I've see the lip on the bottom of the air dam, but not clear how it holds the rubber.....
If you pull back the lip on upper edge of the rubber, it covers some fastener holes where the rubber is attached to the fiberglass air dam with screws or rivets.
-Carl
This style is now SOLD. This is the other style I have. It has a few scratches as pictured. The rubber is 73.5" long. It comes with the mounting bolts and plates.
-Carl
The 1st one is the easy style to mount.
I know a few guys were looking for these, but we have no plans to make these as there wasn’t enough demand to justify sitting on 100 pcs.
I’m sure you’ll find a buyer.
Both now sold, thanks! The rubber shown from Post #6 is sold. The rubber from Post #1 is still available.
thanks!
Carl
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)