Printable Version of Topic

Click here to view this topic in its original format

914World.com _ FS/WTB: 914 Parts _ FS: Alternator Tin Pieces

Posted by: saigon71 Sep 10 2018, 02:45 PM

Both were wire-wheeled and treated with rust stopper before being shot with semi-gloss black paint. Both show some texture where the rust was removed, but look good otherwise. I ran a thread restorer through all the threaded nut holes.

$10 each + shipping.

Attached Image

Posted by: Driver174 Sep 10 2018, 10:39 PM

I’ll take the one with square hole and slight dimple that goes on mount with alternator. Let me know total cost shipped to 89123 please!

Thanks,
JIM

Posted by: saigon71 Sep 11 2018, 02:13 PM

QUOTE(Driver174 @ Sep 11 2018, 12:39 AM)

I’ll take the one with square hole and slight dimple that goes on mount with alternator. Let me know total cost shipped to 89123 please!

Thanks,
JIM

PM sent with shipping quote and paypal instructions. Thanks.

Posted by: ericoneal Sep 11 2018, 07:03 PM

Does the top piece fit over the bottom piece to encase the alternator? I have the bottom piece, wondering if I need both..

Posted by: saigon71 Sep 13 2018, 06:14 AM

QUOTE(ericoneal @ Sep 11 2018, 09:03 PM)

Does the top piece fit over the bottom piece to encase the alternator? I have the bottom piece, wondering if I need both..

No. The top piece bolts attaches to the non-pulley side of the alternator to enclose the electrical connections. It mounts on the studs that run the length of the alternator (they are a little long).